Noise Free 16 pin Self-Start Interleaved PFC
CM6565
Noise Free 16 pin Self-Start Interleaved PFC with 180 Degree Phase Shift CRM PFC Controller for 90+/85+
GENERAL ...
Description
CM6565
Noise Free 16 pin Self-Start Interleaved PFC with 180 Degree Phase Shift CRM PFC Controller for 90+/85+
GENERAL DESCRIPTION
The CM6565 is the industry first 16 pin self-start interleaved
PFC with 180 degree phase shift CRM PFC controller for
total power supply system efficiency greater 90% or 85%.
The CM6565 is like a combination of two 180 degree
phase shift CM6561s plus a lot of light load efficiency boost
functions. CM6565 gives the best noise free performance of
the offline power supply. The desired frequency range for
each PFC controller should be above 35KHz.
Mismatches between two boost converters for the interleaved PFC can be less than +/-5%.
Basically, it is like two 6561s work together with 180 degree phase shift plus light load improvements.
1. IAC (pin 1), Multiplier input pin: Current input instead of
Voltage input; it will enhance input current THD and the system will be less sensitive to the noise. The system can
reduce one resistor between ground and IAC, multiplier input pin.
2. IAC (pin 1), Multiplier input pin: During the start up
condition (the VCC is less than UVLO, 13V), IAC is connected to VCC, and the RAC resistor (between VIN pin
and IAC pin) serves as a bleed resistor. Once the VCC is greater than UVLO, then, RAC resistor provides the sine
wave current from VIN pin to IAC pin. After VCC is greater than UVLO, the voltage of the IAC pin is around 1.4V.
Therefore, the RAC resistor can be served...
Similar Datasheet