DatasheetsPDF.com

P6SMB91A Dataheets PDF



Part Number P6SMB91A
Manufacturers Pan Jit International
Logo Pan Jit International
Description SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Datasheet P6SMB91A DatasheetP6SMB91A Datasheet (PDF)

P6SMB SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600Watts BREAK DOWN VOLTAGE 6.8 to 400 Volt FEATURES • For surface mounted applications in order to optimize board space. • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Fammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • Lead free in compliance with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.

  P6SMB91A   P6SMB91A



Document
P6SMB SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600Watts BREAK DOWN VOLTAGE 6.8 to 400 Volt FEATURES • For surface mounted applications in order to optimize board space. • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Fammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • Lead free in compliance with EU RoHS 2011/65/EU directives • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.155(3.94) 0.130(3.30) 0.012(0.305) 0.006(0.152) 0.096(2.44) 0.083(2.13) MECHANICAL DATA • Case:JEDEC DO-214AA ,Molded plastic over passivated junction • Terminals: Solder plated,solderable per MIL-STD-750,Method 2026 • Polarity : Color band denotes cathode end • Standard Packaging:12mm tape (EIA-481) • Weight: 0.003 ounce, 0.093 gram 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types Ele ctrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%. Rating Peak Pulse Power Dissipation on 10/1000s waveform (Notes 1,2, Fig.1) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Notes 2,3) Peak Pulse Current on 10/1000s waveform (Notes 1) Fig.3 Typical Thermal Resistance Junction to Air (Notes 2) Operating Junction and Storage Temperature Range Symbol PPP IFSM IPPM RJA TJ,TSTG Value 600 100 see Table 1 60 -55 to +150 Units Watts Amps Amps OC / W OC NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig. 2. 2. Mounted on 5mm2 (0.13mm thick) land areas. 3. Measured on 8.3ms, single hal f sine-wave or equivalent s quare wave, duty cycle = 4 pulse s per minute maximum. 4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. December 2,2013-REV.08 PAGE . 1 P6SMB SERIES Part Number Reverse Stand-off Voltage Breakdown Voltage UNI V RWM (Notes 4) VBR @ IT Mi n. Ma x. BI V V V 600W Transient Voltage Suppressor P6SMB6.8 P6SMB6.8C 5.5 6.12 7.48 P6SMB6.8A P6SMB6.8CA 5.8 6.45 7.14 P6SMB7.5 P6SMB7.5C 6.05 6.75 8.25 P6SMB7.5A P6SMB7.5CA 6.4 7.13 7.88 P6SMB8.2 P6SMB8.2C 6.63 7.38 9.02 P6SMB8.2A P6SMB8.2CA 7.02 7.79 8.61 P6SMB9.1 P6SMB9.1C 7.37 8.19 10 P6SMB9.1A P6SMB9.1CA 7.78 8.65 9.5 P6SMB10 P6SMB10C 8.1 9 11 P6SMB10A P6SMB10CA 8.55 9.5 10.5 P6SMB11 P6SMB11C 8.92 9.9 12.1 P6SMB11A P6SMB11CA 9.4 10.5 11.6 P6SMB12 P6SMB12C 9.72 10.8 13.2 P6SMB12A P6SMB12CA 10.2 11.4 12.6 P6SMB13 P6SMB13C 10.5 11.7 14.3 P6SMB13A P6SMB13CA 11.1 12.4 13.7 P6SMB15 P6SMB15C 12.1 13.5 16.5 P6SMB15A P6SMB15CA 1.


P6SMB91 P6SMB91A P6SMB100


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)