Glass Passivated Junction Plastic Rectifiers
1N4001GP THRU 1N4007GP
Features
1.0 AMP. Glass Passivated Junction Plastic Rectifiers
Voltage Range 50 to 1000 Volts
C...
Description
1N4001GP THRU 1N4007GP
Features
1.0 AMP. Glass Passivated Junction Plastic Rectifiers
Voltage Range 50 to 1000 Volts
Current 1.0 Ampere
DO-41
a High temperature metallurgically bonded construction a Plastic material used carries Underwriters Laboratory
Classification 94V-O a Glass passivated cavity-free junction a Capable of meeting environmental standards of
MIL-S-19500 a 1.0 ampere operation at TA=75oC and 55oC with no thermal
runaway a Typical IR less than 0.1 uA a High temperature soldering guaranteed:
350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs.
(2.3kg) tension
Mechanical Data
a Case: JEDEC DO-41 molded plastic over glass body a Lead: Plated axial leads, solderable per MIL-STD-750,
Method 2026 a Polarity: Color band denotes cathode end a Mounting position: Any
a Weight: 0.012 ounce, 0.3 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25+ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
1N 1N 1N 1N 1N 1N 1N Units
4001GP 4002GP 4003GP 4004GP 4005GP 4006GP 4007GP
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
.375”(9.5mm) Lead Length @TA = 75+
1.0 A
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superim...
Similar Datasheet