SINTERED GLASS JUNCTION PLASTIC RECTIFIER
1N4001GP THRU 1N4007GP
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
High te...
Description
1N4001GP THRU 1N4007GP
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350℃/10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.1µA
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: color band denotes cathode Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%)
SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 GP GP GP GP GP
* Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600
* Maximum RMS Voltage
Vrms
35
70 140 280 420
* Maximum DC blocking Voltage
* Maximum Average Forward Rectified
Current 3/8”lead length at Ta =75°C
* Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load
Vdc 50 100 200 400 600
If(av)
1.0
Ifsm 30.0
Maximum Instantaneous Forward Voltage at 1.0A * Maximum full load reverse current full cycle
Average at 75°C
* Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C
Typical Reverse Recovery Time (Not...
Similar Datasheet