A6011

A6011 / SMA6011 Cascadable Amplifier 2000 to 6000 MHz Rev. V4 Features  LOW NOISE FIGURE: 1.5 dB (TYP.)  MEDIUM OUTPUT POWER: +18 dBm (TYP.)  HIGH EFFICIENCY: 58 mA (TYP.) @ +5 Vdc  PHEMT AMPLIFIER Description The A6011 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage GaAs FET feedback amplifier design displays impressive performance characteristics over a broadband frequency range. An RF choke is used for DC power supply decoupling. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number A6011 SMA6011 CA6011 ** Package TO-8 Surface Mount SMA Connectorized ** The connectorized version is not RoHs compliant. Product Image Electrical Specifications: Z0 = 50, VCC = +5 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Units GHz dB dB dB dB dBm dBm dBm Typical 25ºC 1.5-6.0 14.8 ±0.6 16 1.5 18.0 +30 +45 Guaranteed 0º to 50ºC -54º to +85ºC* 2.0-6.0 2.0-6.0 13.5 12.5 ±0.9 ±1.1 2.5 16.5 3.0 16.0 Parameter Absolute Maximum Storage Temperature -62ºC to +150ºC Case Temperature 125ºC DC Voltage +7 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 100 mW Peak Power (3 µsec max.) 0.25 W “S” Series Burn-In Temperature (c...