A1031

A1031 / SMA1031 Cascadable Amplifier 10 to 1000 MHz Rev. V3 Features  HIGH EFFICIENCY: 36 mA at +5 Vdc  LOW NOISE FIGURE: 2.7 dB (TYP.)  HIGH GAIN, TWO STAGES: 28.5 dB (TYP.)  MED OUTPUT POWER: +10 dBm (TYP.) Description The A1031RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for consistent performance and high reliability. This 2 stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network insures temperature-stable performance. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Product Image Part Number Package A1031 TO-8 SMA1031 Surface Mount CA1031 ** SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50, VCC = +5 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Units MHz dB dB dB dB dBm dBm dBm Typical 25ºC 5-1100 28.5 ±0.4 35 2.7 10.0 +22 +33 Guaranteed 0º to 50ºC -54º to +85ºC* 10-1000 10-1000 26.5 26.0 ±0.8 ±1.0 3.5 4.0 9.0 8.5 Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature 125ºC DC Voltage +10 V Continuous Input Power +10 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn...