AM-177

AM-177 Cascadable Thin Film Amplifier, 10 dB Gain, 10 - 1000 MHz Features  +22 dBm Typical High 1 dB Compression  +38 dBm Typical High Third Order Intercept  1.2:1 Typical VSWR Description M/A-COM’s AM-177 is a feedback amplifier with high intercept and compression points. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-177 is ideally suited for use where a high intercept, high reliability amplifier is required. Outline Drawing: TO-8-1 * RF OUT .220 (5.6) MIN .220 (5.6) MAX DC IN RF IN .150 (3.8) TYP. .300 (7.6) TYP. GND 4X Ø .018+/-.005 (0.46+/-0.13) .450 (11.4) Rev. V4 Ø .50 (12.7+0.5) WEIGHT (APPROX) 0.10 OUNCES 2.8 GRAMS Electrical Specifications: 1,2 TA = -55°C to +85°C Case Temperature Parameter Gain Frequency Response Test Conditions @+25oC — Frequency 500 MHz 10 - 1000 MHz Units dB dB Min. 9.5 — Typ. 10.0 — Max. 10.5 ±0.5 Gain Variation with Temperature 1 dB Compression — Output Power 10 - 1000 MHz dB — — +0.8 10 - 1000 MHz dBm +20 +22 — Noise Figure — 10 - 1000 MHz dB — 5.8 8.5 Reverse Transmission VSWR — 10 - 1000 MHz dB — -16 -14 — 10 - 1000 MHz Ratio — 1.6:1 2.0:1 Output IP2 Output IP3 Two-Tone inputs up to 0 dBm Two-Tone inputs up to 0 dBm 10 - 1000 MHz 10 - 1000 MHz dBm dBm +42 +30 — — — — Vbias Ibias Power Dissipation — Vbias = +1...