Document
Photocouplers Photorelay
TLP3107
TLP3107
1. Applications
• Mechanical relay replacements • Security Systems • Measuring Instruments • Factory Automation (FA) • Amusement Equipment
2. General
The TLP3107 photorelay consists of a photo MOSFET optically coupled to an infrared LED. It is housed in a 2.54SOP6 package. The low ON-state resistance and the high permissible ON-state current of the TLP3107 make it suitable for power line control applications.
3. Features
(1) Normally opened (1-Form-A) (2) OFF-state output terminal voltage: 60 V (min) (3) Trigger LED current: 3 mA (max) (4) ON-state current: 3.3 A (max) (A connection) (5) ON-state resistance: 60 mΩ (max) (A connection) (6) Isolation voltage: 1500 Vrms (min) (7) Safety standards
UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
4. Packaging and Pin Assignment
11-7C1S
1: Anode 2: Cathode 3: N.C. 4: Drain 5: Source 6: Drain
©2017-2020 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2013-10
2020-02-17 Rev.3.0
5. Internal Circuit
TLP3107
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Rating
Unit
LED Input forward current
IF
30
mA
Input forward current derating
(Ta ≥ 25 )
∆IF/∆Ta
-0.3
mA/
Input forward current (pulsed)
(100 µs pulse, 100 pps)
IFP
1
A
Input reverse voltage
VR
5
V
Input power dissipation
PD
50
mW
Input power dissipation derating
(Ta ≥ 25 )
∆PD/∆Ta
-0.5
mW/
Junction temperature
Tj
125
Detector OFF-state output terminal voltage
VOFF
60
V
ON-state current (A connection)
ION
(Note 1)
3.3
A
ON-state current (B connection)
ION
(Note 1)
3.3
ON-state current (C connection)
ION
(Note 1)
6.6
ON-state current derating (A connection)
(Ta ≥ 25 )
∆ION/∆Ta (Note 1)
-33
mA/
ON-state current derating (B connection)
(Ta ≥ 25 )
∆ION/∆Ta (Note 1)
-33
ON-state current derating (C connection)
(Ta ≥ 25 )
∆ION/∆Ta (Note 1)
-66
ON-state current (pulsed)
(t = 100 ms, Duty = 1/10)
IONP
10
A
Output power dissipation
PO
430
mW
Output power dissipation derating
(Ta ≥ 25 )
∆PO/∆Ta
-4.3
mW/
Junction temperature
Tj
125
Common Storage temperature
Tstg
-55 to 125
Operating temperature
Topr
-40 to 85
Lead soldering temperature
(10 s)
Tsol
260
Isolation voltage
AC, 60 s, R.H. ≤ 60 %
BVS
(Note 2)
1500
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: For an application circuit example, see Chapter 12.2. Note 2: This device is considered as a two-terminal device: Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6
are shorted together.
©2017-2020 Toshiba Electronic Devices & Storage Corporation
2
2020-02-17 Rev.3.0
7. Recommended Operating Conditions (Note)
TLP3107
Characteristics
Symbol Note Min Typ. Max Unit
Supply voltage
VDD
48
V
Input forward current
IF
5
10
25
mA
ON-state current (A connection)
ION
3.3
A
Operating temperature
Topr
-20
65
Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this data sheet should also be considered.
8. Electrical Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
LED Input forward voltage Input reverse current Input capacitance
Detector OFF-state current Output capacitance
Symbol
VF IR Ct IOFF COFF
Note
Test Condition
IF = 10 mA VR = 5 V V = 0 V, f = 1 MHz VOFF = 60 V V = 0 V, f = 1 MHz
Min Typ. Max Unit
1.18 1.33 1.48
V
10
µA
70
pF
20
nA
700 1500 pF
9. Coupled Electrical Characteristics (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol Note
Test Condition
Min Typ. Max Unit
Trigger LED current
IFT
ION = 2.0 A
Return LED current
IFC
IOFF = 10 µA
ON-state resistance (A connection) RON (Note 1) ION = 2.0 A, IF = 5 mA, t < 1 s ON-state resistance (B connection)
ON-state resistance (C connection)
ION = 4.0 A, IF = 5 mA, t < 1 s
Note 1: For an application circuit example, see Chapter 12.2.
0.2
3
mA
0.1
30
60
mΩ
15
8
10. Isolation .