Document
UNISONIC TECHNOLOGIES CO., LTD
PZT2907A
PNP SILICON TRANSISTOR
PNP GENERAL PURPOSE AMPLIFIER
DESCRIPTION
This UTC PZT2907A is designed for use as a general purpose amplifier and switch requiring collector currents to 600 mA.
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen-Free
PZT2907AL-AA3-R
PZT2907AG-AA3-R
Note: Pin Assignment: B: Base C: Collector E: Emitter
Package SOT-223
Pin Assignment 123 BCE
Packing Tape Reel
PZT2907AG-AA3-R
(1)Packing Type (2)Package Type (3)Green Package
(1) R: Tape Reel (2) AA3: SOT-223 (3) G: Halogen Free and Lead Free, L: Lead Free
MARKING
www.unisonic.com.tw Copyright © 2018 Unisonic Technologies Co., Ltd
1 of 3
QW-R207-023.E
PZT2907A
PNP SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATING (TA=25°С unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Emitter Voltage
VCEO
-60
V
Collector-Base Voltage Emitter-Base Voltage
VCBO VEBO
-60 -5
V V
Collector Current Continuous Power Dissipation
IC
-600
mA
PD 1.3 W
Junction Temperature
TJ
+150
°С
Storage Temperature
TSTG
-55 ~ +150
°С
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Mounted on PCB with 3mm copper at each terminal.
THERMAL DATA
PARAMETER
SYMBOL
Thermal Resistance
θJA
Note: Mounted on PCB with 3mm copper at each terminal.
RATINGS 90
UNIT °С/W
ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (Note) Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current
Collector Cutoff Current
BVCEO BVCBO BVEBO
IB ICEX
ICBO
IC=-10mA, IB=0 IC=-10μA, IE=0 IE=-10μA , IC=0 VCB=-30V, VEB=-0.5V VCE=-30V, VBE=-0.5V VCB=-50V, IE=0 VCB=-50V, IE=0, TA=150°С
ON CHARACTERISTICS DC Current Gain
Collector-Emitter Saturation Voltage (Note) Base-Emitter Saturation Voltage
hFE
VCE(SAT) VBE(SAT)
IC=-0.1mA, VCE=-10V IC=-1.0 mA, VCE=-10V IC=-10 mA, VCE=-10V IC=-150 mA, VCE=-10V (Note) IC=-500 mA, VCE=-10V (Note) IC=-150 mA, IB=-15mA IC=-500 mA, IB=-50mA IC=-150 mA, IB=-15mA (Note) IC=-500 mA, IB=-50mA
SMALL SIGNAL CHARACTERISTICS Current Gain – Bandwidth Product Output Capacitance Input Capacitance
fT IC=-50mA, VCE=-20V, f=100MHz Cob VCB=-10V, IE=0, f=100kHz Cib VEB=-2V, IC=0, f=100kHz
SWITCHING CHARACTERISTICS
Turn-on Time Delay Time Rise Time
tON tDLY tR
VCC=30V, IC=-150mA, IB1=-15mA
Turn-off Time Storage Time Fall Time
tOFF tS tF
VCC=6V, IC=-150mA, IB1= IB2=-15mA
Note: Pulse Test: Pulse Width 300ms, Duty Cycle2.0%
MIN TYP MAX UNIT
-60 V -60 V -5 V
-50 nA -50 nA -0.02 μA -20 μA
75 100 100 100 300 50
-0.4 V -1.6 V -1.3 V -2.6 V
200 MHz 8 pF 30 pF
45 ns 10 ns 40 ns 100 ns 80 ns 30 ns
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R207-023.E
PZT2907A
TEST CIRCUITS
PNP SILICON TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R207-023.E
.