SOD4001

Features Low forward surge current Ideal for surface mouted applications Low leakage current 1.9± 0.1 SOD4001-SOD4007 Plastic Silicon Rectifiers REVERSE VOLTAGE: 50 - 1000 V CURRENT: 1.0 A SOD - 123FL Cathode Band Top View 2.8 0.1 1.0 0.2 0.10-0.30 1.4± 0.15 Mechanical Data Case:JEDEC SOD-123FL,molded plastic over passivated chip Polarity: Color band denotes cathode end Weight: 0.006 ounces, 0.02 gram Mounting position: Any 0.6 0.25 3.7 0.2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS Device marking code SOD SOD SOD SOD SOD SOD SOD 4001 4002 4003 4004 4005 4006 4007 UNITS D1 D2 D3 D4 D5 D6 D7 Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forword rectified current @TA=75 I(AV) 1.0 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load IFSM 25 A Maximum instantaneous forward voltage @IFM=1.0A (Note 1) Maximum DC reverse current @TA=25 at rated DC blocking voltage @TA=125 VF IR 1.1 V 5.0 µA 50 Typical junction capacitance measured at f=1MHZ,VR=4.0V CJ Typical thermal resistance junction to lead Operating temperature range RθJL Tj Storage temperature range TST...