1A Load Switch
TCK101G/102G
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCK101G, TCK102G
1A Load Switch IC with Slew Rat...
Description
TCK101G/102G
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCK101G, TCK102G
1A Load Switch IC with Slew Rate Control Driver
The TCK101G and TCK102G are load switch ICs for power management with slew rate control driver featuring wide input voltage operation from 1.1 to 5.5 V. Switch ON resistance is only 55 mΩ typical at 3.3 V, 500 mA load condition and these feature a slew rate control driver and thermal shutdown. TCK101G has output auto-discharge function. Maximum Output current type is available up to 1 .0A (DC).
This device is available in 0.4 mm pitch ultra small package WCSP6B (0.8 mm x 1.2 mm, t: 0.64 mm (max)). Thus this device is ideal for portable applications that require high-density board assembly such as cellular phone.
WCSP6B Weight: 1 mg (typ.)
Feature
Wide input voltage operation: VIN = 1.1 to 5.5 V Low ON resistance :
RON = 50 mΩ (typ.) at VIN = 5.0 V, 500 mA RON = 55 mΩ (typ.) at VIN = 3.3 V, 500 mA RON = 75 mΩ (typ.) at VIN = 1.8 V, 500 mA RON = 120 mΩ (typ.) at VIN = 1.2 V, 500 mA Low Quiescent Current: IQ = 8 μA (typ.) at VIN = VCT = 5.5 V, IOUT = 0 mA Low standby current: IQ(OFF) = 0.07 μA (typ.) at OFF state Inrush current reduction circuit Thermal Shutdown function Auto-discharge (TCK101G) Pull down connection between CONTROL and GND Ultra small package : WCSP6B (0.8mm x 1.2mm, t: 0.64mm(max))
Start of commercial production
2012-08 1 2014-03-01
Absolute Maximum Ratings (Ta = 25°C)
TCK101G/102G
Characteristics
Sym...
Similar Datasheet