TC78H610FNG
TOSHIBA CDMOS Integrated Circuit Silicon Monolithic
TC78H610FNG
DUAL H-BRIDGE DRIVER IC
The TC78H610FNG is a...
TC78H610FNG
TOSHIBA CDMOS Integrated Circuit Silicon Monolithic
TC78H610FNG
DUAL H-BRIDGE DRIVER IC
The TC78H610FNG is a dual H-bridge driver IC for DC motors which incorporates DMOS in output
transistors. The TC78H610FNG is capable of driving 2 DC brushed motors or 1 stepping motor.
SSOP16-P-225-0.65B Weight: 0.07g(Typ.)
Features
Power supply voltage for motor
:VM=18V(Absolute Maximum Ratings)
Power supply voltage for control
:VCC=6V(Absolute Maximum Ratings)
Output current
:IOUT=1.0A(Absolute Maximum Ratings)
Output ON resistance
:Ron(upper and lower sum)=1.2Ω(Typ.)
Internal pull-down resistors on inputs :200kΩ(Typ.)
Built-in over current detection (ISD), thermal shutdwon (TSD) circuit,
and under voltage lockout (UVLO) circuit.
Small package
:SSOP16(0.65mm pitch)
Built-in cross conduction protection circuit
This product has a MOS structure and is sensitive to electrostatic discharge. When handling this product, ensure that the environment is protected against electrostatic discharge by using an earth strap, a conductive mat and an ionizer. Ensure also that the ambient temperature and relative humidity are maintained at reasonable levels.
The IC should be installed correctly. Otherwise, the IC or peripheral parts and devices may be degraded or permanently damaged.
©2016 Toshiba Corporation
1
2016-11-25
Block Diagram
VCC
TC78H610FNG
IN1A IN2A IN1B IN2B /STBY
UVLO
Motor Control Logic
ISD UVLO TSD
Predriver Predriver
H-Bridge A H-...