TB67S213FTAG

TOSHIBA BiCD Integrated Circuit Silicon Monolithic TB67S213FTAG TB67S213FTAG PWM method PHASE-IN Bipolar stepping motor driver FTAG The TB67S213FTAG is a pwm method phase signal controlled motor driver for two-phase bipolar stepping motor. Using the BiCD process, the TB67S213FTAG is rated at 40V/2.5A.(Absolute maximum ratings) Also, with the built-in VCC regulator, the TB67S213FTAG can be operated with a single motor power(VM) supply. P-WQFN36-0606-0.50-002 Features Weight:0.14(g) ・The TB67S213FTAG can operate a single bipolar stepping motor. ・PWM method current feedback control. ・Operational in Full, Half, and Quarter step resolutions. ・Uses low on-resistance MOSFETs for output stage. ・High voltage and large current. (For specification, please refer to the absolute maximum ratings and operation ranges.) ・Error detection circuits (Thermal Shutdown(TSD), Over current shutdown(ISD), and Power-on reset(POR)) ・The built-in VCC regulator allows the TB67S213FTAG to operate with a single VM power supply. ・Customizable PWM chopping frequency using the external components (resistance/condenser). ・Package: TB67S213FTAG: P-WQFN36-0606-0.50-002 Note) Please be careful about thermal conditions during use. 1 2013-08-19 Ver.1.02 Pin assignment (Top View) TB67S213FTAG NC NC VCC NC VM RS_B RS_B OUT_B＋ OUT_B＋ NC GND VREF_B VREF_A OSCM IN_A1 IN_A2 PHASE_A PHASE_B 27 26 25 24 23 22 21 20 19 28 18 29 17 30 16 31 15 32 TB67S213FTAG 14 33 13 34 12 35 11 36 10 123 456789 ...