TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic
TB6643KQ
Full-Bridge DC Motor Driver IC
The TB6643KQ is a full-br...
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic
TB6643KQ
Full-Bridge DC Motor Driver IC
The TB6643KQ is a full-bridge DC motor driver IC employing the MOS process for output power
transistors.
The low ON-resistance MOS process and PWM control enables driving DC motors with high thermal efficiency.
Four operating modes are selectable via IN1 and IN2: clockwise (CW), counterclockwise (CCW), Short Brake and Stop.
Features
Power supply voltage: 50 V (max) Output current: 4.5 A (max) Output ON-resistance: 0.55 (typ.) PWM control CW/CCW/Short Brake/Stop modes Overcurrent shutdown circuit (ISD) Overvoltage shutdown circuit (VSD) Thermal shutdown circuit (TSD) Undervoltage lockout circuit (UVLO) Dead time for preventing shoot-through current
Weight: 2.2 g (typ.)
TB6643KQ
Note: The following conditions apply to solderability: About solderability, following conditions were confirmed (1) Use of Sn-37Pb solder Bath solder bath temperature: 230°C dipping time: 5 seconds the number of times: once use of R-type flux (2) Use of Sn-3.0Ag-0.5Cu solder Bath solder bath temperature: 245°C dipping time: 5 seconds the number of times: once use of R-type flux
1
2011-06-21
TB6643KQ
Block Diagram (application circuit example)
The application circuits shown in this document are provided for reference purposes only. Thorough evaluation is required, especially at the mass production design stage.
Toshiba does not grant any license to any industrial prope...