Octal Line Driver
UC5170C
Octal Line Driver
FEATURES • Eight Single Ended Line Drivers in
One Package
• Meets EIA Standards EIA232E/V.28...
Description
UC5170C
Octal Line Driver
FEATURES Eight Single Ended Line Drivers in
One Package
Meets EIA Standards EIA232E/V.28, EIA423A and CCITT V.10/X.26
Single External Resistor Controls Slew Rate
Wide Supply Voltage Range
Tri-State Outputs
Output Short-Circuit Protection
DESCRIPTION
The UC5170C is a single-ended octal line driver designed to meet both standard modem control applications (EIA232E/V.28), and long line drive applications (EIA423A/V.10/X.26). The slew rate for all eight drivers is controlled by a single external resistor. The slew rate and output levels in Low Mode are independent of the power variations.
Mode selection is easily accomplished by taking the select pins (MS+ and MS-) to ground for low output mode (EIA232E/V.28 and EIA423A/V.10) or to their respective supplies for high mode (EIA232E/V.28). High mode should only by used to drive adapters that take power from the control lines, or applications using high threshold receivers.
ABSOLUTE MAXIMUM RATINGS (Note 1)
V+ (Pin 20) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V V- (Pin 11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −15V PLCC Power Dissipation, TA = 25°C (Note 2) . . . . . . 1000 mW
DIP Power Dissipation, TA = 25°C (Note 2) . . . . . . . . 1250 mW Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . −1.5V to +7V Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . −12V to +12V Slew Rate Resis...
Similar Datasheet