Motion SPM 45 module
FNC42060F / FNC42060F2 Motion SPM® 45 Series
FNC42060F / FNC42060F2
Motion SPM® 45 Series
January 2014
Features
• UL ...
Description
FNC42060F / FNC42060F2 Motion SPM® 45 Series
FNC42060F / FNC42060F2
Motion SPM® 45 Series
January 2014
Features
UL Certified No. E209204 (UL1557) 600 V - 20 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection Low Thermal Resistance Using Ceramic Substrate Low-Loss, Short-Circuit Rated IGBTs Built-In Bootstrap Diodes and Dedicated Vs Pins Sim-
plify PCB Layout Built-In NTC Thermistor for Temperature Monitoring Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing Single-Grounded Power Supply Optimized for 5 kHz Switching Frequency Isolation Rating: 2000 Vrms / min.
General Description
FNC42060F / FNC42060F2 is an advanced Motion SPM® 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Applications
Motion Control - Home Appliance / Industrial Motor
...
Similar Datasheet