Motion SPM 45 module
FNB43060T2 Motion SPM® 45 Series
FNB43060T2
Motion SPM® 45 Series
March 2016
Features
• UL Certified No. E209204 (UL1...
Description
FNB43060T2 Motion SPM® 45 Series
FNB43060T2
Motion SPM® 45 Series
March 2016
Features
UL Certified No. E209204 (UL1557)
600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection
Low Thermal Resistance Using Ceramic Substrate Low-Loss, Short-Circuit Rated IGBTs
Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
Built-In NTC Thermistor for Temperature Monitoring
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Single-Grounded Power Supply Isolation Rating: 2000 Vrms / min.
General Description
FNB43060T2 is an advanced Motion SPM® 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Applications
Motion Control - Home Appliance / Industrial Motor
Related Resources
AN-9084 - Smart Power Module, Motion SPM® 45 H V3 Series User’s Guil...
Similar Datasheet