FNA23060

FNA23060 600 V Motion SPM® 2 Series August 2015 FNA23060 600 V Motion SPM® 2 Series Features UL Certified No. E209204 (UL1557) 600 V - 30 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and Protections Low-Loss, Short-Circuit-Rated IGBTs Very Low Thermal Resistance Using Al2O3 DBC Substrate Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing Single-Grounded Power Supply Supported Built-In NTC Thermistor for Temperature Monitoring and Management Adjustable Over-Current Protection via Integrated Sense-IGBTs Isolation Rating of 2500 Vrms / 1 min. General Description The FNA23060 is a Motion SPM® 2 module providing a fully-featured, high-performance inverter output stage for AC induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logiclevel gate inputs to high-voltage, high-current drive signals to properly drive the module's internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Applications Motion Control - Industrial Motor (AC 200 V Class) Related Reso...