TVS Diode
SMBJ Series
TVS Diodes
Surface Mount – 600W > SMBJ series
RoHS
Pb e3
Uni-directional
Description
The SMBJ series is...
Description
SMBJ Series
TVS Diodes
Surface Mount – 600W > SMBJ series
RoHS
Pb e3
Uni-directional
Description
The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2)
by 10/1000us Test Waveform(Fig.4) (Note 1),(Note PPPM
600
W
2)-Single Die Parts
Peak Pulse Power Dissipation(Fig.2)
by 10/1000us Test Waveform(Fig.4) (Note 1), (Note 2)-Stacked Die Parts (Note 5)
PPPM
800
W
Power Dissipation on Infinite Heat Sink at TL=50OC
PD
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 4)
VF
5.0
W
100
A
3.5/5.0 V
Operating Temperature Range
TJ -65 to 150 °C
Storage Temperature Range
TSTG -65 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
20 °C/W
Typical Thermal Resistance Junction to Ambient RƟJA
100 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. 4. VF < 3.5V for single die parts and ...
Similar Datasheet