Surface Mount Transient Voltage Suppressor
3.0SMCJ SERIES
Surface Mount Transient Voltage Suppressor
Features
For surface mounted application Low profile package...
Description
3.0SMCJ SERIES
Surface Mount Transient Voltage Suppressor
Features
For surface mounted application Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to
BV min. Typical IR less than 1μA above 10V High temperature soldering guaranteed: 260OC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 3000 watts peak pulse power capability with a 10 X 1000 us waveform by 0.01% duty cycle
Voltage Range 5.0 to 170 Volts 3000 Watts Peak Power SMC/DO-214AB
.129(3.27) .118(3.0)
.245(6.22) .220(5.59)
.103(2.62) .079(2.00)
.280(7.11) .260(6.60)
.012(.31) .006(.15)
Mechanical Data
Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Standard packaging: 16mm tape (EIA STD RS-481) Weight: 0.21gram
.060(1.52) .030(0.76)
.008(.20) .004(.10)
.320(8.13) .305(7.75)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC, Tp=1ms (Note 1)
Symbol PPK
Value Minimum 3000
Units Watts
Steady State Power Dissipation
Pd 5 Watts
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
200 Amps
Maximum Instantaneous Forward Voltage at 100.0A for Unidirectional Only (Note 4)
VF
3...
Similar Datasheet