Document
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 10.0 Ampere
SR1020C THRU
SR10200C
FEATURES
* Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * High switching capability * High surge capabitity * High reliability
MECHANICAL DATA
* Case: To-220 molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
TO-220
.108 ( 2.75)
.413 ( 10.5) .374 ( 9.5)
.153 ( 3.9) .146 ( 3.7)
.270 ( 6.9) .230 ( 5.8)
.187 ( 4.7 ) .148 ( 3.8 )
.053 ( 1.3) .047 ( 1.2)
PIN 1 23
.610 ( 15.5) .583 ( 14.8)
.157 ( 4.0)
.051 ( 1.3)
.583 (14.8) .531( 13.5)
.035 (0.9) .028 ( 0.7)
.102 ( 2.6) .091 ( 2.3)
PIN 1 PIN 3
.020 ( 0.5)
.012 ( 0.3)
PIN 2 HEATSINK
.126 ( 3.2)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
SYMBOL SR1020CSR1030C SR1035C SR1040C SR1045C SR1050C SR1060C SR1080C SR10100C SR10150C SR10200C UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM 20 30 35 40 45 50 60 80 100 150 200 Volts
Maximum RMS Voltage
VRMS 14 21 25 28 32 35 42 56 70 105 140 Volts
Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Case Temperature
VDC 20 30 35 40 45 50 60 80 100 150 200 Volts IO 10.0 Amps
Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method)
IFSM
150 Amps
Typical Thermal Resistance (Note 1)
RqJC RqJA
3.0 0C / W 60
Typical Junction Capacitance (Note 3) Operating Temperature Range
CJ 700 TJ
450 150
pF 0C
Storage Temperature Range
TSTG
-55 to + 150
0C
ELECTRICAL CHARACTERISTICS(@TA=25 OC unless otherwise noted)
CHARACTERISTICS
SYMBOL SR1020CSR1030C SR1035C SR1040C SR1045C SR1050C SR1060C SR1080C SR10100C SR10150C SR10200C UNITS
Maximum Instantaneous Forward Voltage at 5.0A DC
Maximum Average Reverse Current at Rated DC Blocking Voltage
@TA = 25oC @TA = 100oC
VF IR
.65
.75 .85 Volts 0.2 mA 2 mA
NOTES : 1. Thermal Resistance : Heat-sink mounted. 2. Suffix “A” = Common Anode. 3. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
4. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
2006-11
RATING AND CHARACTERISTICS CURVES ( SR1020C THRU SR10200C )
INSTANTANEOUS FORWARD CURRENT, (mA)
AVERAGE FORWARD CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (A)
12 10
10 1.0 TA = 125 OC
8
SR105S0RC1~0S20RC1~0S2R0100C40C
6
4
Single Phase Half Wave
2
60Hz Inductive or Resistive Load
0.375" (9.5mm) Lead Length
0 0 50 100 150
LEAD TEMPERATURE, (OC)
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE 50
SR1020C~SR1040C
SR1050C~SR1060C 10
SR1080C~SR10200C
1.0
TJ = 25 OC Pulse width=300mS 1% Duty Cycle 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4.