low-power micro-processor supervisor
SGM802 Low-Power, SC70/SOT µP Reset Circuit with
Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION
The SGM80...
Description
SGM802 Low-Power, SC70/SOT µP Reset Circuit with
Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION
The SGM802 low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the VCC supply voltage falls below its reset threshold. The reset output remains asserted for the reset timeout period after VCC rises above the reset threshold. The reset timeout is externally set by a capacitor to provide more flexibility.
The SGM802 has an active-high, push-pull reset output. It is available in Green SC70-4 (R) and SOT-143 packages. The SGM802 is specified over an ambient temperature range of -40℃ to +85℃.
FEATURES
● Monitor System Voltages from 1.6V to 5V ● Capacitor-Adjustable Reset Timeout Period ● Low Quiescent Current: 3µA (TYP) ● Push-Pull RESET Output Option ● Guaranteed RESET Valid to VCC = 1V ● Immune to Short VCC Transients ● Available in Green SC70-4 (R) and SOT-143
Packages
APPLICATIONS
Portable Equipment Battery-Powered Computers/Controllers Automotive Medical Equipment Intelligent Instruments Embedded Controllers Critical µP Monitoring Set-Top Boxes Computers
TYPICAL APPLICATION
VCC
CSRT
SRT
SGM802
RESET GND
VCC
Microprocessor System
RESET GND
SG Micro Corp www.sg-micro.com
DECEMBER 2014 – REV. A. 2
SGM802
Low-Power, SC70/SOT µP Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE DESCRIPTION
RESET TH...
Similar Datasheet