SOT uP Reset
SGM800 Low-Power, SOT µP Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION
The SGM800 low...
Description
SGM800 Low-Power, SOT µP Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
GENERAL DESCRIPTION
The SGM800 low-power micro-processor supervisor circuit monitors system voltages from 1.6V to 5V. This device performs a single function: it asserts a reset signal whenever the VCC supply voltage falls below its reset threshold. The reset output remains asserted for the reset timeout period after VCC rises above the reset threshold. The reset timeout is externally set by a capacitor to provide more flexibility.
The SGM800 has an active-low, open-drain reset output. It is available in Green SOT-23-5 package and operates over a temperature range of -40℃ to +85℃.
FEATURES
● Monitor System Voltages from 1.6V to 5V ● Capacitor-Adjustable Reset Timeout Period ● Low Quiescent Current: 3µA (TYP) ● Open-Drain RESET Output Option ● Guaranteed RESET Valid to VCC = 1V ● Immune to Short VCC Transients ● Available in Green SOT-23-5 Package
APPLICATIONS
Portable Equipment Battery-Powered Computers/Controllers Automotive Medical Equipment Intelligent Instruments Embedded Controllers Critical µP Monitoring Set-Top Boxes Computers
TYPICAL APPLICATION
VCC
CSRT
SGM800
SRT
RESET GND
VCC
Microprocessor System
RESET GND
SG Micro Corp www.sg-micro.com
JANUARY 2013 – REV. A. 1
SGM800
Low-Power, SOT µP Reset Circuit with Capacitor-Adjustable Reset Timeout Delay
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE DESCRIPTION
RESET THRESHOLD (V)
1.63
2.32
SGM800
SOT-23-5
2.63
2.93
ORDE...
Similar Datasheet