Surface Mount Rectifiers
Features
Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded constr...
Description
Features
Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded construction
Mechanical Data
Case:JEDEC DO-213AB,molded plastic over passivated chip
Polarity: Color band denotes cathode end Weight: 0.0046 ounces, 0.116 gram Mounting position: Any
SM4001-SM4007
Surface Mount Rectifiers
REVERSE VOLTAGE: 50 - 1000 V CURRENT: 1.0 A
DO - 213AB
D1 2.6± 0.15
SOLDERABLE ENDS
D2=D1
0 0.20
D2
0.5± 0.1 4.9± 0.2
0.5± 0.1
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%.
SM SM SM SM SM
4001 4002 4003 4004 4005
Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600
Maximum RMS voltage
VRMS 35 70 140 280 420
Maximum DC blocking voltage
VDC 50 100 200 400 600
Maximum average forword rectified current TA=75
I(AV)
1.0
Peak forward surge current 8.3ms single
half-sine-wave superimposed
IFSM
30
on rated load (JEDEC method)
Maximum forward voltage at 1.0A Maximum DC reverse current @TA=25
at rated DC blockjing voltage @TA=125 Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Typical thermal resistance (NOTE 3) Operating temperature range Storage temperature range
VF
IR
Cj RjθL RjθA Tj TSTG
1.1 5.0 50 15 20 50 - 55 --- + 175 - 55 --- + 175
NOTES:1. Measured at 1.0MHz and applied average voltage of 4.0V DC.
2....
Similar Datasheet