Document
SVM1550V
ULTRA LOW VF SCHOTTKY RECTIFIER
VOLTAGE 50 Volt
CURRENT 15 Ampere
FEATURES
• Ideal for automated placement • Ultra low forward voltage drop, low power loss • High efficiency operation • Low thermal resistance • Ultra thin profile package for space constrained utilization • Package suitable for automated handling • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
Case : TO-277, Plastic Terminals : Solderable per MIL-STD-750, Method 2026 Weight : 0.0037 ounces, 0.1073 grams Marking : Part number
0.136(3.45) 0.128(3.25) 0.085(2.15)
0.076(1.95)
0.048(1.20) 0.039(1.00)
0.172(4.35) 0.167(4.25)
0.243(6.15) 0.238(6.05)
0.262(6.65) 0.250(6.35)
0.052(1.30) 0.044(1.10) 0.083(2.10)
0.183(4.65) 0.171(4.35)
0.043(1.10) 0.035(0.90)
0.014(0.35) 0.009(0.25)
MAXIMUM RATINGS(TA=25oC unless otherwise noted)
PARAMETER Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Rectified Output Current
Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load
Typical Thermal Resistance
(Note 1) (Note 2)
Operating Junction Temperature Range And Storage Temperature Range
SYMBOL VRRM
VRMS
VR
I F(AV)
I FSM RJA RJC TJ,TSTG
VALUE 50
35
50
15
280 110 5.5 -55 to + 150
UNIT V V V A A
oC/W oC
NOTES : 1.Mounted on a FR4 PCB, single-sided copper, mini pad. 2.Mounted on a 10cm*10cm*0.5mm copper pad area
May 14,2014-REV.00
PAGE . 1
SVM1550V
ELECTRICAL CHARACTERISTICS (TA=25oC unless otherwise noted)
PARAMETER Breakdown voltage Instantaneous forward voltage
Reverse current
SYMBOL
TEST CONDITIONS
VBR I R=0.5mA
I F=1A I F=5A VF I F=15A I F=1A I F=5A
VR=40V IR
VR=50V
TA=25oC TA=25oC TA=125oC
TA=25oC TA=125oC
MIN.
50
-
-
-
TYP.
-
0.28 0.35 0.45 0.18 0.28
60
25
MAX.
-
0.51 -
-
320 -
UNIT V
V
V A A mA
IF, Forward Current (A)
17.5 15
12.5 10 7.5 5 2.5 0 0
25 50 75 100 125 150
TC, Case Temperature (°C)
Fig.1 Forward Current Derating Curve
100 TJ = 150°C
10 TJ = 125°C
1
0.1
0.01 20
40
TJ = 75°C
TJ = 25°C 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig.3 Typical Reverse Characteristics
IF, Forward Current (A)
CJ, Junction Capacitance (pF)
1000
100
10
1 1 10 100
VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance
100 TJ = 150°C
10 TJ = 125°C
1 TJ = 75°C
0.1
0.01 0
TJ = 25°C 0.2 0.4 0.6 0.8
VF, Forward Voltage (V)
Fig.4 Typical Forward Characteristics
IR, Reverse Current (mA)
May 14,2014-REV.00
PAGE . 2
SVM1550V
MOUNTING PAD LAYOUT
0.183 (4.65)
0.038 0.046 (0.97) (1.18)
0.138 (3.50)
0.055 (1.40) 0.083 (2.10)
ORDER INFORMATION
• Packing information T/R - 5K per 13" plastic Reel
May 14,2014-REV.00
PAGE . 3
SVM1550V
Part No_packing code_Version SVM1550V_R2_00001
For example : RB500V-40_R2_00001
Part No.
Serial number Version code means HF Packing size code means 13" Packing type means T/R
Packing Code XX
Version Code XXXXX
Packing type
1st Code
Packing size code
2nd Code HF or RoHS 1st Code 2nd~5th Code
Tape and Ammunition Box (T/B)
A
N/A
0
Tape and Reel (T/R)
R
7"
1
Bulk Packing (B/P)
B
13"
2
Tube Packing (T/P)
T
26mm
X
Tape and Reel (Right Oriented) (TRR)
S
52mm
Y
Tape and Reel (Left Oriented) (TRL)
L
PANASERT T/B CATHODE UP (PBCU)
U
FORMING
F
PANASERT T/B CATHODE DOWN (PBCD)
D
HF RoHS
0 serial number 1 serial number
May 14,2014-REV.00
PAGE . 4
SVM1550V
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
• The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
• Since Panjit uses lot number as the .