MICROMINIATURE POLARIZED RELAY
AZ8462
MICROMINIATURE POLARIZED RELAY
FEATURES
• SMT and DIP mounting available • Microminiature size: up to 50% less ...
Description
AZ8462
MICROMINIATURE POLARIZED RELAY
FEATURES
SMT and DIP mounting available Microminiature size: up to 50% less board area than
previous generation telecom relays High dielectric and surge voltage:
2.5 kV surge (per Bellcore TA-NWT-001089) 1.5 kV surge (per FCC Part 68) 1,000 Vrms, open contacts 2,000 Vrms, coil to contacts Monostable and bistable (latching) versions available Minimum switching load 10 mV, 10 µA Low power consumption: 79 mW pickup Stable contact resistance for low level signal switching Epoxy sealed UL, CUR file E43203
CONTACTS
Arrangement DPDT (2 Form C) Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA Max. switched current: 2 A Max. switched voltage: 220 VDC* or 250 VAC
Rated Load UL
* Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
3 A at 30 VDC, resistive, 85°C, 100k cycles 2 A at 30 VDC resistive, 105°C, 100k cycles * 0.3 A at 110 VDC, resistive, 85°C, 100k cycles 0.5 A at 125 VAC, general use, 85°C
Material Resistance
COIL
Power
* not approved for 48 VDC coil or latching versions. Silver nickel gold plated < 50 milliohms initially
At Pickup Voltage (typical)
Monostable: 79 mW (1.5 - 24 VDC coil) Monostable: 152 mW (48 VDC coil)
Bistable latching (single coil): 57 mW Bistable latching (dual coil): 114 mW
Max. Continuous Dissipation
0.39 W at 20°C (68°F) ambient
GENERAL DATA
Life Expectancy Mechanical
Minimum ope...
Similar Datasheet