CL2101-L

Low Noise Amplifier Product Features GaAs p-HEMT chip on board No matching circuit needed High Maximum input power(+25dBm) High IP3 & Low Noise Single Supply Voltage (+5V) Surface Mount Hybrid Type Tape & Reel Packaging Small Size, High Heatsink Alumina Substrate Pb Free / RoHS Standard CL0901-L / CL1501-L CL1801-L / CL2101-L Applications 2G & 3G Repeater Base Station PCS, CDMA, W-CDMA GSM, DCS, UMTS WiMAX, Wibro, WLAN RF Sub-Systems Package Type : CP-16A Description RFHIC’s LOW Noise Amplifier series are all hybrid LNA type products which includes all matching for the convenience of customers. CL series are focused on giving lowest noise possible. The structure of the device is built with GaAs p-HEMT die attached on a ceramic thick film substrate. The device is still smaller than the area one would use for the application notes all together. Depending on the part number, one can use this in different frequency applications. All LNA hybrids are possible to have custom frequency & spec without any additional NRE cost involved. All RFHIC products are RoHS compliant. Electrical Specifications PARAMETER UNIT CL0901-L Frequency Range MHz 824 ~ 894 (Cellular) 890 ~ 960 (GSM) Small Signal Gain (S21) Gain Flatness dB 19 dB 0.5 18 0.5 Input Return Loss (S11) Output Return Loss (S22) 1dB Compression Point (P1dB) Output 3rd Order Intercept Point (OIP3) (TYP.) dB dB dBm dBm -18 -10 14 27 -18 -10 14 27 Noise Figure (TYP.) dB 0.5 0.5 ...