Buy Electronic Components

G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
Preliminary Specification
Final Specification
Module
Model Name
5.7 Inch Color TFT-LCD
G057QN01 V0
G057QN01 V0
Gleichmann & Co. Electronics GmbH
Product Marketing Displays & Systems
Schraderstr. 44, D- 67227 Frankenthal
Tel : +49 7249-910-0, Fax: +49 7249-910-559
display@msc-ge.com http://www.msc-ge.com
Customer
Date
Approved by
Date
Debbie Chiu
2008/08/04
Checked &
Approved by
Prepared by
David Hsing
2008/06/20
Note: This Specification is subject to change
without notice.
General Display Business Division / AU Optronics
corporation
G057QN01 V0 Ver. 0.3
1/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
Contents
1. Operating Precautions .....................................................................................4
2. General Description..........................................................................................5
2.1 Display Characteristics.......................................................................................................5
2.2 Optical Characteristics .......................................................................................................6
3. Functional Block Diagram................................................................................8
4. Absolute Maximum Ratings .............................................................................9
4.1 Absolute Ratings ................................................................................................................9
4.2 Absolute Ratings of Environment .......................................................................................9
5. Electrical Characteristics ...............................................................................10
5.1 TFT-LCD Driving ..............................................................................................................10
5.2 Backlight Unit Driving ....................................................................................................... 11
6. Signal Characteristic ......................................................................................12
6.1 Pixel Format Image ..........................................................................................................12
6.2 Scanning Direction ...........................................................................................................12
6.3 The Input Data Format .....................................................................................................13
6.4 TFT- LCD Interface Signal Description.............................................................................14
6.5 TFT- LCD Interface Timing ...............................................................................................15
6.6 LED Backlight Unit Interface Signal Description ..............................................................16
6.7 Power ON/OFF Sequence ...............................................................................................16
7. Connector & Pin Assignment.........................................................................17
7.1 TFT- LCD Signal (CN1): LCD Connector .........................................................................17
7.2 LED Backlight Unit (CN2): Backlight Connector...............................................................17
7.3 PIN 1 definition of CN1 and CN2 .....................................................................................18
8. Reliability Test Criteria ...................................................................................18
9. Mechanical Characteristics............................................................................20
10. Label and Packaging ....................................................................................21
10.1 Shipping Label (on the rear side of TFT-LCD display) ...................................................21
10.2 Carton Package .............................................................................................................21
11 Safety..............................................................................................................22
11.1 Keen Edge Requirements ..............................................................................................22
11.2 Materials .........................................................................................................................22
11.3 Capacitors ......................................................................................................................22
11.4 National Test Lab Requirement ......................................................................................22
G057QN01 V0 Ver. 0.3
2/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
Record of Revision
Version and Date Page
Old description
0.1, Oct. 04, 2007 All First edition preliminary specifications
New Description
Remark
0.2, Nov.20, 2007 5 No description
11 No description
Pin 3: Hsync
16 Pin 4: Vsync
19
0.3, Jun.19, 2008
5
Typical Power Consumption
2.19W (LCD:0.69W/LED BLU: 1.5W)
Add “The most suitable view angle:12
o’clock”
Add “VF typical specification”
Add “Note 1”
Pin 3: NC
Pin 4: NC
2D drawing update
Add” Suggested applying torque:
0.15~0.2 Nm“
Typical Power Consumption
1.57W (LCD:0.37W/LED BLU: 1.2W)
Section 2.1
Section 5.2.1
Section 7.1
Section 9
Section 2.1
6
Revise Optical Characteristics
Section 2.2
Absolute Ratings
9
IF: Max.=30mA
VR: Max.= No definition
IR: Max.= No definition
Absolute Ratings
IF: Max.=20mA
VR: Max.=5V
IR: Max.=100μA
Section 4.1
Power Specification
10 IDD: Typ.=210mA
PDD: Typ.=0.69W
Power Specification
IDD: Typ.=115mA, Max.=130mA
PDD: Typ.=0.37W, Max.=0.43W
Section 5.1.1
Parameter guideline for LED
Parameter guideline for LED
IF: Max.= No definition
IF: Max.=20mA
11
VF: Typ.= 27.6V (IF=15mA, Ta=-30 oC)
VF: Typ.= 26.4V, Max.= TBD (IF=15mA, Ta=25 oC)
VF:
VF:
Typ.=
Typ.=
28.0V (IF=15mA, Ta=-30 oC)
26.8V, Max.=32.0V (IF=15mA,
Ta=25
oC)
Section
5.2.1
VF: Typ.= 25.2V (IF=15mA, Ta=85 oC)
VF: Typ.= 26.1V (IF=15mA, Ta=85 oC)
Operating life: Min.=20000 hrs, Max.=40000 hrs Operating life: Min.=25000 hrs, Max.=50000 hrs
LCD Connecter
LCD Connecter
17 Manufacture: Hirose or compatible
Manufacture: Starconn or compatible
Section 7.1
Mating Connecter Model Number: FH12-33S-0.5SH (55) Mating Connecter Model Number: 089H33-000100-G2-R
Backlight Connecter
Backlight Connecter
Manufacture: JST or compatible
Manufacture: STM or compatible
17
Connecter Model Number: SHLP-06V-S-B or compatible
Pin #4 color: Blue
Connecter Model Number: P24021P6 or compatible
Pin #4 color: White
Pin #5 color: White
Pin #5 color: Blue
Section 7.2
Carton Package
21 Max. capacity: No definition
Max. weight: No definition
Carton Package
Max. capacity: 60 pcs TFT-LCD module per carton Section 10.2
Max. weight: 12.65 Kg per carton
G057QN01 V0 Ver. 0.3
3/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
1. Operating Precautions
1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not
to scratch it.
2) Be sure to power off your machine before connecting or disconnecting your signal cable to
TFT-LCD Module.
3) Wipe off water drop on display area immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard
object.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the TFT-LCD module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged.
10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply
abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module by
end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen
saver or moving content periodically if fixed pattern is displayed on the screen.
G057QN01 V0 Ver. 0.3
4/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
2. General Description
G057QN01 V0 is designed for industrial display applications with QVGA (320 x RGB x 240)
resolution and 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and
power supply circuits board and backlight unit. G057QN01 V0 offers CMOS interface for display
signal input. LED driving board for backlight unit is not included.
2.1 Display Characteristics
The following items are G057QN01 V0 characteristics summary at 25 (Room Temperature).
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Typical Power Consumption
Weight
Physical Size
Electrical Interface
Surface Treatment
Unit
inch
mm
mm
Volt
Watt
Grams
mm
Specifications
5.7
115.2(H) x 86.4(V)
320 x 3(RGB) x 240
0.36 x 0.36
R.G.B. Vertical Stripe
TN, Normally White
3.3 typ.
1.57W (LCD:0.37W/LED BLU: 1.2W)
All black pattern
155g (typ.), 170g (max.)
144.0(H)x 104.6(V) x 12.3(D) (typ.)
CMOS 6-bit Parallel RGB
Anti-Glare, Hardness 3H
Support Color
262K colors
The most suitable view angle
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
12 o’clock
oC -30 to +85
oC -30 to +85
RoHS Compliance
G057QN01 V0 Ver. 0.3
5/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature).
Item
White Luminance
Unit
cd/m2
Conditions
IF= 15mA / 1 LED line
(center point)
Min.
300
Typ.
400
Uniformity
% 5 Points
-
Max.
-
1.3
Contrast Ratio
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut
msec
msec
msec
degree
degree
degree
degree
%
Rising
Falling
Rising + Falling
Horizontal (Right)
CR = 10 (Left)
Vertical
CR = 10
White x
White y
Red x
Red y
Green x
Green y
Blue x
Blue y
(Upper)
(Lower)
500
-
-
-
70
70
60
60
0.263
0.279
0.510
0.280
0.275
0.535
0.100
0.055
-
800
15
10
25
80
80
70
70
0.313
0.329
0.560
0.330
0.325
0.585
0.150
0.105
50
-
20
15
35
-
-
-
-
0.363
0.379
0.610
0.380
0.375
0.635
0.200
0.155
-
Remark
Note 1
Note
1, 2, 3
Note 4
Note 5
Note 6
Note 1: Measurement method
Equipment
Aperture
Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
1 with 50cm viewing distance
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
measuring distance
Module Driving Equipment
G057QN01 V0 Ver. 0.3
6/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H))
W /4
W /4
W
W /4
W /4
H /4
H /4
H
H /4
H /4
12
3
45
G057QN01 V0
Note 3:
The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance
value at full white condition.
δW5 =
Maximum Brightness of five points
Minimum Brightness of five points
Note 4: Definition of contrast ratio (CR):
Brightness @ “White” state
Contrast ratio (CR) =
Brightness @ “Black” state
Note 5: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling
time) and from “Black” to “White” (rising time), respectively. The response time interval definition is between 10% and 90%
of amplitude. Please refer to the figure as below.
% Tf
Optical
response
100
90
10
0
White
Black
Tr
White
G057QN01 V0 Ver. 0.3
7/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
Note 6: Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over 180° horizontal and 180° vertical
range. The 180°horizontal (θL, θR) and 180°vertical (ΦH, ΦL) range are illustrated as following figure.
3. Functional Block Diagram
The following diagram shows the functional block of the G057QN01 V0 color TFT/LCD module.
G057QN01 V0 Ver. 0.3
8/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
4. Absolute Maximum Ratings
4.1 Absolute Ratings
Item
Logic/LCD Drive Voltage
LED Forward Current
LED Reverse Voltage
LED Reverse Current
Symbol
VDD
IF
VR
IR
Min
-0.3
0
-
-
G057QN01 V0
Max Unit
Remark
+3.6 Volt
20 mA
5 Volt
μ100 A For each channel LED
4.2 Absolute Ratings of Environment
Item
Operating Temperature
Symbol
TOP
Min
-30
Max Unit
+85
Remark
Note 1, 2
Operation Humidity
Storage Temperature
HOP
TST
5
-30
95 %RH
+85
Note 1, 2
Note 1
Storage Humidity
HST
5
95
Note 1: Maximum Wet-Bulb should be 39 and no condensation.
%RH
Note 1
Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25 only.
G057QN01 V0 Ver. 0.3
9/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
5. Electrical Characteristics
5.1 TFT-LCD Driving
5.1.1 Power Specification
Symbol
Parameter
VDD Logic/LCD Drive Voltage
IDD VDD Current
Irush LCD Inrush Current
PDD VDD Power
VDDrp Allowable Logic/LCD Drive Ripple Voltage
Min Typ Max Units
Remark
3.0 3.3 3.6 Volt
All Black Pattern
- 115 130 mA
(VDD=3.3V, at 60Hz)
-
- 1.5
A Note 1
All Black Pattern
- 0.37 0.43 Watt
(VDD=3.3V, at 60Hz)
All Black Pattern
- - 100 mVp-p
(VDD=3.3V, at 60Hz)
Note 1: Measurement condition:
+3.3V
(High to Low)
Control
Signal
SW1
SW MAG-SPST
+12.0V
R2
1K
C2
1uF/25V
R1
47K
R2
1K
VR1
47K
Q3
AO6402
D6
D5
D2
D1
S
Q3
AO6402
G
C3
0.01uF/25V
F1
VDD VCC
(LCD Module Input)
C1
1uF/16V
90%
3.3V
10%
0V
0.5ms
VDD rising time
G057QN01 V0 Ver. 0.3
10/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Parameter
Symbol Min.
Logic Input Voltage for
Display Signals
High
Low
VIH 0.7VDD
VIL 0
Input Voltage for RL/UD
High
Low
VIH 0.7VDD
VIL 0
Typ.
-
-
-
-
Max.
VDD
0.3VDD
VDD
0.3VDD
Unit
Volt
Volt
Volt
Volt
Remarks
5.2 Backlight Unit Driving
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25 (Room Temperature).
Symbol
Parameter
Min
Typ
Max
Unit
Remark
IF LED Forward Current
VF LED Forward Voltage
- 15 20 mA Ta = 25oC
- 28.0
- Volt IF = 15mA, Ta = -30oC
- 26.8 32 Volt IF = 15mA, Ta = 25oC
- 26.1
- Volt IF = 15mA, Ta = 85oC
PLED
LED Power
- 1.2
- Watt
Operating Life
25000 50000
Hrs IF = 15mA, Ta = 25oC
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: IF, VF are defined for one channel LED. There are total three LED channels (AN1-CA1, AN2-CA2, AN3-CA3) in
back light unit. See Section 6.6 for LED Backlight Unit Interface Signal Description.
Note 3: If G057QN01 V0 module is driven by high current or at high ambient temperature & humidity condition. The
operating life will be reduced.
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
G057QN01 V0 Ver. 0.3
11/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
G057QN01 V0
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Note 1: TFT-LCD interface signal description is shown in section 6.4.
G057QN01 V0 Ver. 0.3
12/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
6.3 The Input Data Format
This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates
the display of input data.
G057QN01 V0 Ver. 0.3
13/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
6.4 TFT- LCD Interface Signal Description
G057QN01 V0
Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”.
G057QN01 V0 Ver. 0.3
14/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
6.5 TFT- LCD Interface Timing
6.5.1 Timing Characteristics
DE mode only
Signal
Symbol
Clock frequency (DOTCLK)
1/ TCLOCK
Horizontal Section
Period
TH
Active
THD
Blanking
THB
Vertical Section
Period
TV
Active
TVD
Blanking
TVB
Note 1: Recommended frame rate is 60 Hz.
Min.
6.2
406
86
254
14
Typ.
6.4
408
320
88
263
240
23
Max.
12.1
560
240
360
120
Unit
MHz
TCLOCK
TLINE
Remark
Note1
Note1
Note1
6.5.2 Input Timing Diagram
TCLOCK
Input Timing Definition ( DE Mode)
DOTCLK
Input
Data
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
DE
THB
THD
TH
DE
TVB
TVD
TV
G057QN01 V0 Ver. 0.3
15/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
6.6 LED Backlight Unit Interface Signal Description
Pin #
1
2
3
4
5
6
Symbol
AN1
AN2
AN3
CA1
CA2
CA3
Pin Description
Channel 1 LED anode
Channel 2 LED anode
Channel 3 LED anode
Channel 1 LED cathode
Channel 2 LED cathode
Channel 3 LED cathode
6.7 Power ON/OFF Sequence
VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any
system shall be Hi-Z state or low level when VDD is off.
Power ON/OFF sequence timing
Parameter
Min.
Value
Typ.
Max.
Units
T1 0.5 - 10 ms
T2 0 - 50 ms
T3 0 - 50 ms
T4 0 - 10 ms
T5 200 - - ms
T6 200 - - ms
T7 500 - - ms
ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power
when you plug the cable into the input connector or pull the cable out of the connector.
G057QN01 V0 Ver. 0.3
16/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
7. Connector & Pin Assignment
7.1 TFT- LCD Signal (CN1): LCD Connector
Manufacturer
Mating Connecter Model Number
Starconn or compatible
089H33-000100-G2-R or compatible
Pin#
1
2
3
4
5
6
7
8
9
10
11
Symbol
GND
DOTCLK
NC
NC
GND
R0
R1
R2
R3
R4
R5
Pin#
12
13
14
15
16
17
18
19
20
21
22
Symbol
GND
G0
G1
G2
G3
G4
G5
GND
B0
B1
B2
Pin#
23
24
25
26
27
28
29
30
31
32
33
Symbol
B3
B4
B5
GND
DE
VDD
VDD
R/L
U/D
NC
GND
7.2 LED Backlight Unit (CN2): Backlight Connector
Manufacturer
Connector Model Number
Mating Connecter Model Number
STM or compatible
P24021P6 or compatible
SM06B-SHLS-TF or compatible
Pin #
1
2
3
Symbol
AN1
AN2
AN3
Cable color
Red
Red
Red
Pin #
4
5
6
Symbol
CA1
CA2
CA3
Cable color
White
Blue
Black
G057QN01 V0 Ver. 0.3
17/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
7.3 PIN 1 definition of CN1 and CN2
G057QN01 V0
8. Reliability Test Criteria
Items
Required Condition
Temperature Humidity Bias 40 /90%,300Hr
High Temperature Operation 85 ,300Hr
Low Temperature Operation -30 ,300Hr
High Temperature Storage 85 ,300 hours
Low Temperature Storage -30 ,300 hours
Thermal Shock Test
℃ ℃-20 /30 min ,60 /30 min ,100cycles
Hot Start Test
85 /1 Hr (min.), power on/off per 5 minutes, repeat 5 times
Cold Start Test
-30 /1 Hr (min.), power on/off per 5 minutes, repeat 5 times
Remark
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Note 2
Shock Test
(Non-Operating)
50G,20ms,Half-sine wave, (±X, ±Y, ±Z)
Note 2
Vibration Test
(Non-Operating)
1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z)
Note 2
ESD
Contact Discharge: ±8KV, 150pF(330) 1sec, 8 points, 25 times/point
Air Discharge: ±15KV, 150pF(330) 1sec, 8 points, 25 times/point
Note 1,2
Attitude Test
Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs
Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs
Note 2
Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module
is self-recoverable, no data lost and no hardware failures after test.
G057QN01 V0 Ver. 0.3
18/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
Note2:
Water condensation is not allowed for each test items.
Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.
The reliability test is performed only to examine the TFT-LCD module capability.
To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24
hours at least in advance.
G057QN01 V0 Ver. 0.3
19/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
9. Mechanical Characteristics
G057QN01 V0
G057QN01 V0 Ver. 0.3
20/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
G057QN01 V0
10.2 Carton Package
Max. capacity: 60 pieces TFT-LCD module per carton
Max. weight: 12.65 kg per carton
Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm
G057QN01 V0 Ver. 0.3
21/22


G057QN01-V0 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.net
G057QN01 V0
11 Safety
11.1 Keen Edge Requirements
There will be no keen edges or corners on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will
be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD
Module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be
printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being
inserted backwards.
11.4 National Test Lab Requirement
The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology
Equipment).
G057QN01 V0 Ver. 0.3
22/22





Click to Download PDF File