B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Features
• Diplexer Single mode, Single Fiber 1x9 SC Receptacle
Connetor
• Wavelength Tx 1310nm/Rx 1550 nm
• SONET OC-3 SDH STM-1 Compliant
• Single +5V Power Supply (B-13/15-155-T-SSC4)
• Single +3.3V Power Supply (B-13/15-155-T3-SSC4)
• PECL/LVPECL Differential Inputs and Outputs
• Wave Solderable and Aqueous washable
• LED Multisourced 1x9 Transceiver Interchangeable
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled Laser Diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Temperature Range: 0 to 70ºC
• Optical Isolation > 30 dB
• Cross Talk < -33 dB
Absolute Maximum Rating
Parameter
Symbol
Power Supply Voltage
Power Supply Voltage
Input Voltage
Vcc
Vcc
-
Output Current
Soldering Temperature
Storage Temperature
Iout
-
Tstg
Recommended Operating Condition
Parameter
Symbol
Power Supply Voltage
Power Supply Voltage
Operating Temperature
Data rate
Vcc
Vcc
Topr
Min.
0
0
0
-
-
-40
Min.
4.75
3.1
0
-
Max.
6
3.6
Vcc
30
260
85
Typ.
5
3.3
-
155
Unit
V
V
V
mA
ºC
ºC
Max.
5.25
3.5
70
-
Note
B-13/15-155-T-SSC4
B-13/15-155-T3-SSC4
10 seconds on leads only
Unit
V
V
ºC
Mbps
Transmitter Specifications, (0ºC<Topr<70ºC, VCC ± 5%)
Parameter
Symbol Min Typical
Max
Unit Notes
Optical
Optical Transmit Power Po -8 -
-3
dBm
Output power is coupled into a 9/125 µm single
mode fiber
Output Center Wavelength
λ
1260
1310
1360
nm
Output Spectrum Width
Δλ
3 nm RMS(σ)
Extinction Ratio
ER 8.2
-
- dB
Output Eye
wwOwp.tDicaaltRaiSseheTiemt4eU.com
Compliant with ITU-T recommendation G.957/STM1
tr - -
2 ns 10% to 90% Values
Optical Fall Time
tf - -
2 ns 10% to 90% Values
Optical Isolation
30 -
- dB Tx: 1310 nm/ Rx: 1530 nm
Relative Intensity Noise RIN -
-
-116
dB/Hz
Total Jitter
TJ
-
-
1.2
ns
Measured with 223-1 PRBS with 72 ones and 72
zeros.
1


B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Transmitter Specifications, (0ºC<Topr<70ºC, VCC ± 5%)
Parameter
Symbol Min Typical
Electrical
Power Supply Current
ICC -
-
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
IIL
IIH
VIH-VIL
VIL-VCC
-350
-
300
-2.0
-
-
-
-
Data Input Voltage-High
VIH-VCC
-1.1
-
Max
140
-
350
-
-1.58
-0.74
Unit
Notes
mA
Maximum current is specified at Vcc= Maximum @
maximum temperature
µA
µA
mV
V These inputs are compatible with 10K, 10KH and
V 100K ECL and PECL inputs
Receiver Specifications, (0ºC<Topr<70ºC, VCC ± 5%)
Parameter
Symbol
Min
Optical
Sensitivity
--
Maximum Input Power
Signal Detect-Asserted
Pin -3
Pa -
Signal Detect-Deasserted
Signal Detect-Hysteresis
Cross Talk
Wavelength of Operation
Pd -45
1
--
1490
Typical
-
-
-
-
-
-
-
Max
-33
-
-33
-
4
-33
1600
Unit Notes
dBm Measured with 223-1 PRBS, BER 10-10
dBm
dBm Measured on transition: low to high
dBm Measured on transition: high to low
dB
dB
nm
Receiver Specifications, (0ºC<Topr<70ºC, VCC ± 5%)
Parameter
Symbol
Min
Electrical
Power Supply Current
Data Output Voltage-Low
Data Output Voltage-High
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
ICC
VOL -Vcc
VOH- Vcc
VSDL-Vcc
VSDH- Vcc
-
-2
-1.1
-2
-1.1
Typical
-
-
-
-
-
Max
100
-1.58
-0.74
-1.58
-0.74
www.DataSheet4U.com
Unit
Notes
mA The current excludes the output load current
V
V These outputs are compatible with 10K,
V 10KH and 100KECL and LVPECL outputs.
V
2


B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

Connection Diagram
1. (Rx GND)
2. (Rx +)
3. (Rx-)
4. (SD)
5. (Rx Vcc)
6. (Tx Vcc)
7. (TD-)
8. (TD+)
9. (Tx GND)
NC
Top View
NC
155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Receiver Signal Ground
Receiver Data Out
Receiver Data Out Bar
Signal Detect
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
Transmitter Signal Ground
PIN
1
2
3
4
5
6
7
Warning8s
9
Symbol
RxGND
RD+
RD-
SD
RxVcc
TxVcc
TD-
TD+
TxGND
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
See recommended circuit schematic
Active high on this indicates a received optical signal
Dc power for the receiver section
Dc power for the transmitter section
See recommended circuit schematic
See recommended circuit schematic
Directly connect this pin to the transmitter ground plane
Legal Notice
www.DataSheet4U.com
3


B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

Recommended Circuit Schematic
B-13/15-155-T-SSC4
155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Tx Vcc
Rx Vcc
C5
R1
82RR832R
987654321
R9
82R8R2R782R C6
R5
TD+ RD+
TD-
Tx Vcc
RD-
SD
Rx Vcc
R2 13R014R30R No internal
No internal R10 1301RR3081R30R
connection
connection
R6
Notes:
R1=R3=R5=R7=R9=82
R2=R4=R6=R8=R10=130
C1=C2=C3=C5=C6=0.1 F
C4=10 F
L1=L2=1 H
Transceiver
Top view
L1 Rx Vcc
C3 C1
Vcc
L2 Tx Vcc
C4 C2
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
Recommended Circuit Schematic
B-13/15-155-T3-SSC4
www.DataSheet4U.com
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
4


B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Package Diagram
Diplexer Transceiver Assembly (Receptacle Type)
Top View
Front View
x8
Side View
Rear View
www.DataSheet4U.com
5


B-13-15-155-T3-SSC4 Datasheet PDF
No Preview Available !

Click to Download PDF File

155 Mbps Bi-directional SC Receptacle
Single Fiber Transceiver
B-13/15-155-T(3)-SSC 4
Ordering Information
B -13/15 - 155 -T(3) - S SC 4
• Tx Wavelength = 1310 nm
Rx Wavelength = 1530 nm
• Communication protocol
(155 Mbps)
• 5V /3.3V Transceiver
Single mode fiber
• Connector options
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminentʼs sole and absolute discretion. Luminent warrants performance of its
products to current specifications only in accordance with the companyʼs standard one-year warranty; however, specifications designated as “preliminary” are given to
describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties
of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the companyʼs Terms and Conditions of Sale for further
warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property
described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representa-
www.DtioantsaoSr whaereratn4tiUes.tchoatmthe product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT
intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling
products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Lumi-
nent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENT.COM
6
LUMNDS608-0603



Click to Download PDF File