X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
X00619
0.8 A sensitive gate SCR
Features
IT(RMS) = 0.8 A
VDRM / VRRM = 600 V
IGT = 30 to 200 µA
Applications
Limited gate current topologies
Ground fault circuit interrupters
Overvoltage crowbar protection in power
supplies
Protection in electronic ballasts
Capacitive discharge ignitions
Ignitors (lighting, oven...)
Description
The X006 SCR can be used as on/off function in
applications where topology does not offer high
current for gate triggering.
This device is optimized in forward voltage drop
and inrush current capabilities for reduced power
losses and high reliability in harsh environments.
A
G
K
KGA
TO-92
(X00619-MA)
Table 1. Device summary
IT(RMS)
0.8 A
VDRM / VRRM
600 V
IGT 30 to 200 µA
May 2009
Doc ID 15755 Rev 1
1/7
www.st.com
7


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatCaShaheraect4teUr.icsotimcs
1 Characteristics
X00619
Table 2.
Symbol
Absolute ratings (limiting values, TJ = 25 °C unless otherwise specified)
Parameter
Value
Unit
IT(RMS) On-state rms current (180 °Conduction angle)
IT(AV) Average on-state current (180 °Conduction angle)
ITSM Non repetitive surge peak on-state current
I²t I²t Value for fusing
di/dt
IGM
PG(AV)
Tstg
Tj
Critical rate of rise of on-state current
IG = 2 x IGT , tr 100 ns
Peak gate current
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
TL = 85 °C
TL = 85 °C
tp = 8.3 ms
Tj = 25 °C
tp = 10 ms
tp = 10 ms Tj = 25 °C
F = 60 Hz Tj = 125 °C
tp = 20 µs
Tj = 125 °C
Tj = 125 °C
0.8 A
0.5 A
10
A
9
0.4 A2s
50 A/µs
1
0.1
- 40 to + 150
- 40 to + 125
A
W
°C
Table 3.
Symbol
Electrical characteristics (TJ = 25 °C unless otherwise specified)
Test conditions
IGT
VGT
VGD
VRG
IH
IL
dV/dt
VD = 12 V, RL = 140 Ω
VD = VDRM, RL = 3.3 kΩ , RGK = 1 kΩ
IRG = 10 µA
IT = 50 mA, RGK = 1 kΩ
IG = 1 mA, RGK = 1 kΩ
VD = 67% VDRM, RGK = 1 kΩ
Tj = 125 °C
Tj = 125 °C
MIN.
MAX.
MIN.
MIN.
MAX.
MAX.
MIN.
Value
30
200
0.8
0.2
5
5
6
40
Unit
µA
V
V
V
mA
mA
V/µs
Table 4. Static electrical characteristics (per diode)
Symbol
Test conditions
VTM ITM = 1 A, tp = 380 µs
VTO Threshold voltage
Rd Dynamic resistance
IDRM IRRM VDRM = VRRM, RGK = 1 kΩ
Tj = 25 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
MAX
Value
1.35
0.85
245
1
100
Unit
V
V
mΩ
µA
µA
2/7 Doc ID 15755 Rev 1


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatXa0S0h6e1e9t4U.com
Characteristics
Table 5. Thermal resistances
Symbol
Rth(j-a)
Rth(j-l)
Junction to ambient (DC)
Junction to lead (DC)
Parameter
Value
150
70
Unit
°C/W
Figure 1.
Maximum average power
dissipation vs. average
on-state current
Figure 2. Average and DC on-state current
vs. case temperature
P(W)
0.6
α = 180°
0.5
0.4
0.3
0.2
0.1
0.0
0.0
0.1
IT(AV)(A)
0.2 0.3
0.4
360°
α
0.5 0.6
IT(AV)(A)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
25
D.C.
α = 180°
Tl(°C)
50 75
100 125
Figure 3. Average and DC on-state current
vs. case temperature
IT(AV)(A)
1.0
0.9
D.C.
0.8
0.7
0.6
α = 180°
0.5
0.4
0.3
0.2
0.1
0.0
0
25
SCU = 0.5 cm2
Tamb(°C)
50 75
100 125
Figure 4.
Relative variation of thermal
impedance junction to ambient vs.
pulse duration
Zth(j-a)/Rth(j-a)
1.00
SCU = 0.5 cm2
0.10
0.01
1.E-03
1.E-02
1.E-01
tp(s)
1.E+00
1.E+01
1.E+02
1.E+03
Doc ID 15755 Rev 1
3/7


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatCaShaheraect4teUr.icsotimcs
X00619
Figure 5.
Relative variation of gate trigger,
holding and latching current vs.
junction temperature
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25°C]
1.6
1.4 Typical values
1.2
1.0
IH & IL
0.8
0.6 IGT
0.4
0.2
Tj(°C)
0.0
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Figure 6.
Relative variation of holding
current vs. gate-cathode resistance
(typical values)
IH[RGK] / IH[RGK=1kΩ]
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1.E-02
1.E-01
RGK(kΩ)
1.E+00
1.E+01
1.E+02
Figure 7.
Relative variatiohn of dV/dt
immunity vs. gate-cathode
resistance (typical values)
dV/dt[RGK] / dV/dt[RGK=1kΩ]
100.0
VD = 0.67 x VDRM
Figure 8.
Relative variation of dV/dt immunity
vs. gate-cathode capacitance
(typical values)
dV/dt[CGK] / dV/dt[RGK=1kΩ]
100
VD = 0.67 x VDRM
RGK = 1kΩ
10.0
1.0
10
0.1
1.0E-01
RGK(kΩ)
1.0E+00
1.0E+01
1
1
CGK(nF)
10
Figure 9. Surge peak on-state current vs.
number of cycles
ITSM(A)
10
9
8
7
6
5
4 Repetitive
TC=25°C
3
2
1
0
1
Non repetitive
Tj initial=25°C
Number of cycles
10 100
tp=10ms
One cycle
1000
Figure 10. Non repetitive surge peak on state
current for a sinusoidal pulse and
corresponding value of I2T
ITSM(A), I2t (A2s)
1.E+02
Tj initial = 25°C
ITSM
1.E+01
1.E+00
1.E-01
0.01
tp(ms)
0.10
I2t
1.00
10.00
4/7 Doc ID 15755 Rev 1


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatXa0S0h6e1e9t4U.com
Ordering information scheme
Figure 11.
On-state characteristics (maximum values)
ITM(A)
10.00
Tj max.:
Vt0=0.85V
Rd=245mΩ
1.00
Tj=125°C
0.10
Tj=25°C
VTM(V)
0.01
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
2 Ordering information scheme
Figure 12. Ordering information scheme
X 006 19 M
A Blank 1AA2
Sensitive SCR series
Current
006 = 0.8 A
Sensitivity
19 = 30 µA to 200 µA
Voltage
M = 600 V
Package
A = TO-92
Space
One blank space
Package
1AA2 = Bulk
2AL2 = Ammopack
5AL2 = Tape and reel
Doc ID 15755 Rev 1
5/7


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatPaaSchkeaegt4eUi.ncfoomrmation
3 Package information
X00619
Epoxy meets UL94, V0
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 6.
BC
TO-92 (plastic) dimensions
Dimensions
Ref. Millimeters
Inches
A
FD E
Min. Typ. Max. Min. Typ. Max.
aA
B
- 1.35 -
- 0.053 -
- - 4.70 - - 0.185
C - 2.54 -
- 0.100 -
D 4.40 -
- 0.173 -
-
E 12.70 -
F- -
- 0.500 -
-
3.70 -
- 0.146
a-
- 0.50 -
- 0.019
4 Ordering information
Table 7. Ordering information
Order code
Marking
Package
X00619MA 1AA2
X00619MA 2AL2
X00619MA 5AL2
X0619 MA
TO-92
Weight
0.2 g
Base qty
2500
2000
2000
Delivery mode
Bulk
Ammopack
Tape and reel
5 Revision history
Table 8. Document revision history
Date
Revision
26-May-2009
1 First issue
Changes
6/7 Doc ID 15755 Rev 1


X00619 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DatXa0S0h6e1e9t4U.com
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 15755 Rev 1
7/7



Buy Electronic Components



Click to Download PDF File