Hyundai
Hyundai


H-CMD7073

DVD/MP3/CD Receiver


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

H-CMD7073
www.DataSheet4U.com
DVD/MP3/CD RECEIVER
Instruction manual
DVD/MP3/CD-


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before
connecting, operating and/or adjusting the product and keep the manual for reference in the future.
Table of contents
Table of contents.................................................................................................................................................................. 2
Important safeguards............................................................................................................................................................ 3
Installation/Connections....................................................................................................................................................... 4
Accessories.......................................................................................................................................................................... 9
Controls description ............................................................................................................................................................10
General operations ..............................................................................................................................................................13
Radio operations .................................................................................................................................................................15
Discs operations..................................................................................................................................................................19
Notes on MP3 and WMA....................................................................................................................................................23
System setup.......................................................................................................................................................................25
www.DataShAenett4i-Uth.ceofmt system.................................................................................................................................................................28
Cleaning .............................................................................................................................................................................29
Troubleshooting guide.........................................................................................................................................................30
Specification .......................................................................................................................................................................31
2


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Important safeguards
Read carefully through the manual to familiarize yours with this high-quality sound system.
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage
rating may cause serious damage to the unit.
Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety
hazards such as electrical shock or laser beam exposure.
Do not use the unit in places where it can be exposed to water, moisture and dust.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal
before operating the unit.
Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a
thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound,
www.DataSheet4hUa.csoamstrange smell, has smoke emitting from it or liquids have got inside it. Let a qualified technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before
installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn
out the power amplifier.
Do not install the detachable panel before connecting the wire.
3


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Installation/Connections
First complete the electrical connections, and then check them for correctness. If you are not confident working with
electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other components of your vehicle, please
call your dealer in order to have the unit professionally installed.
Before installing the unit, please remove two screws on the top.
Before the installation
1. Remove the old unit from the dashboard.
Remove the outer trim frame.
Insert the keys supplied with the unit into both sides of the unit as shown in figure below until they click. Pull to remove
the old unit from the dashboard. Do not disconnect wires at this time!
www.DataSheet4U.com
2. Mark polarity of the speaker wires.
Marking the polarity of the speaker wires will make it easier to connect the existing speakers to your unit. Consult wiring
diagram of existing head unit before disconnecting any wires. If you are not positive of the polarity of the existing wires from
the speakers to the head unit, install new wires.
While the old unit is playing, disconnect the wires from one speaker.
Take a length of masking tape and fold it around the wire so it forms a flag.
On the masking tape mark the polarity of the speaker wires (+ & -), as well as left or right, and front or rear.
Repeat this procedure for all of the speakers.
Mark the power, ground, and any other wires also.
4


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Installation method A
After inserting the holder into the dashboard, select the appropriate tab and
bend them inwards to secure the holder in place.
Insert fingers into the groove in the front of frame and remove it.
Insert the levers supplied with the unit to the grooves at both sides. The unit
can be installed or removed from the dashboard.
Installation way (method 2)
Installation using the screw holes at both sides of the unit.
1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions at
www.DataSheeaecth4Usi.cdoem.
Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape
of the screw holes in the bracket.
2. Screw.
3. Factory radio mounting bracket.
4. Dashboard or Console.
5. Hook (Remove this part).
Note: The mounting box, outer trim ring, and the Half-sleeve are not used for this method of
installation.
5


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Detachable control panel
Detaching the control panel
1. Press the OPEN button on the front panel. The panel will go down (pic. 1).
2. Push the panel to the left and then pull it towards you (pic. 2).
Attaching the control panel
1. Insert the left side of the control panel into the main unit (pic. 3).
Note: the control panel must be attached into the T-Joint.
2. Press the right side of the control panel until a “click” sound is heard.
3. Close the panel.
Pic. 1
Pic. 2
Caution:
Do not insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case
and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
www.DataSheet4U.com
Pic. 3
Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl
alcohol to clean the socket on the back of the control panel.
Electrical connections
Speaker wiring notes
Follow the above wiring diagram to install the head unit with new or existing speakers.
This unit is designed for use with four (4) speakers with an impedance between 4 Ohms to 8 Ohms.
An impedance load of less than 4 Ohms could damage the unit.
Never bridge or combine the speaker wire outputs. When not using four speakers, use electrical tape to tape the ends of
the unused speaker outputs to prevent a short circuit.
Never ground the negative speaker terminals to chassis ground.
6


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Connection diagram:
www.DataSheet4U.com
7


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully before
connecting, incorrect connection may cause serious damage to this unit.
Cut the connector, connect the colored leads of the power cord to the car battery as shown in the colour code
table below for speaker and power cable connections.
Location
1
2
3
www.DataSheet4U.4com
5
6
7
8
Connector A
Battery 12V (+)/yellow
Auto Antenna/Orange
Panel light/White
ACC+/red
Ground/black
FUNCTION
Connector B
Rear Right(+)---Blue
Rear Right(-)---Blue/White Stripe
Front Right(+)---Grey
Front Right(-)---Grey/White Stripe
Front Left(+)---Green
Front Left((-)---Green/White Stripe
Rear Left(+)---Brown
Rear Left(-)---Brown/White Stripe
8


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Accessories
1. Receiver
2. Remote controller
3. Carrying case
4. ISO connector
5. Mounting parts:
Hexagon nut M5 T (3.5 mm)
Mounting box (0.6 mm)
Left key (1.0 mm)
Right key (1.0 mm)
Metal bar (0.8 mm)
Plain washer (5 mm)
Outer trim ring
Spring washer (5 mm)
Screw (5X5 mm)
www.DataSheet4US.ccroemw (5X25 mm)
Screw M5 (5X29.3 mm)
6. Customer information
7. Warranty card
8. Instruction manual
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs
4 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
9


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Controls description
Front panel
1. PTY/CLK button
2. 1/LEFT/OSD button
3. MUTE button
4. 2/RIGHT/RPT button
5. TA button
6. 3/UP/INT button
7. 4/DOWN/RDM button
8. 5/STOP button
9. 6/SET/PAU button
10. IR sensor
11. OPEN button
12. Display
13. APS button
www.DataSh1e4e.t4PUO.coWmER button
15. BND/NP/SUB button
16. MODE button
17. VOL knob/SEL button
18. AF button
19. PREV/NEXT buttons
10


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Back of the front panel
Press the OPEN button to open the panel.
1. LED indicator
2. RESET button (hole)
3. Disc slot
4. EJECT button
4
3
2
Note: Pressing the RESET hole will erase the clock setting and stored stations.
Panel status indicator lights up when you slide the panel down, flashes when you remove the panel.
www.DataSheet4U.com
1
11


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Remote control
1. POWER button
2. MODE button
3. PLAY/PAUSE button
4. MUTE button
5. BND/SYS button
6. ENTER button
7. UP/DOWN/LEFT/RIGHT cursor buttons
8. STOP/REVERSE button
9. ST/PROG button
10. AMS/RPT button
11. SEL button
12. LOC/RDM button
13. PBC/MENU button
14. OSD button
15. Digit buttons
16. TITLE button
www.DataSh1e7e.t4US.cUoBm-T button
18. SETUP button
19. ANGLE button
23. SEEK-/SEEK+ /PREV/NEXT buttons
20. SLOW button
24. AUDIO button
21. ZOOM button
25. GOTO button
22. VOL-/VOL+ buttons
26. 10+ button
Changing the battery
Press the catch and at the same time pull out the battery tray. Insert the 1 x lithium battery, type CR
2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote
control.
12


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button and remove the panel, then press the RESET button to restore the unit to the original factory settings.
Power button
Press any button to turn the unit on. Press the POWER button to switch the unit off.
Note: After the unit is off, the clock, volume level and radio current settings will be memorized, and when you turn the unit
on it will resume the stored status you set.
Volume adjustment
Rotate VOL knob on the panel clockwise or press VOL+ button on the RC to increase the volume level; rotate anticlockwise
or press VOL- button to decrease the volume level.
Mute function
Press the MUTE button to cancel the sound. Press again to resume.
www.DataSheet4U.com
Mode selecting
Press the MOD button on the front panel or MODE button on RC repeatedly to select the mode: RADIO => DISC (the type
of disc inserted).
Subwoofer control
Press and hold the BAND/NP/SUB button on the panel to turn the Subwoofer output ON. An external amplifier is required to
operate a subwoofer.
Sound settings
Press SEL button shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD => LOUD => LOC =>
ST => EQ => COLOR 1. Rotate the VOL knob or use VOL +/- buttons to adjust each mode.
13


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

VOLUME: 00, 02,......, 38, 39
BASS/TREBLE: -7, -6,......, 0, +1, +2,......+6, +7
BALANCE: 7L, 6L,......, L=R, 1R,......,7R
FADER: 7R, 6R,......, R=F, 1F,......, 7F
LOUD: ON/OFF
LOC: LOC ON, LOC OFF (DX).
ST: STEREO, MONO
EQ: CLASS, POP, ROCK, FLAT, OFF
COLOR: COLOR1, COLOR2 (to select the needed backlight color).
Note: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of
radio or disc playback mode.
Clock display and adjustment
1. Press and hold the PTY/CLK button on the panel to show the time on the display.
2. Press and hold it, the hour will blink.
3. Rotate the VOL knob on the panel to adjust the hour.
4. Press briefly the SEL button again, the minute will blink.
www.DataSh5e.et4UR.cootmate the VOL knob on the panel to adjust minutes.
6. Press the PTY/CLK button to confirm it.
14


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in
you area, the following service is not available, either.
Band select
Press BAND/NP/SUB button on the front panel or BND/SYS button on RC repeatedly to select your desired radio band
during RADIO mode: FM1, FM2, FM3, AM1, AM2.
Auto/Manual tuning
Manual tuning: Press briefly the SEEK-/+ buttons on the RC or press briefly PREV/NEXT buttons on the panel to
select a station downward or upward step by step.
Automatic tuning: Press and hold for 2 seconds the SEEK-/+ buttons on the RC press and hold for 2 seconds
PREV/NEXT buttons on the panel, the automatic search will start. It will play when finds the station.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
www.DataShTeoet4stUo.rceoma station:
Select a band (if needed)
Select a station by SEEK-/+ on the RC or PREV/NEXT buttons on the panel.
Hold a Preset button (1-6), which you want store the station for at least 2 seconds.
To recall a station:
Select a band (if needed)
Press a Preset button (1-6) briefly to recall the stored station
APS (Auto memory store/Preset scan) function
Preset scan: press APS button on the panel or AMS button on the RC to scan all preset stations in the memory of the
current band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. To listen to
saved station press 1-6 buttons.
15


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Auto memory store: press APS button on the panel for more than 2 seconds to enter auto store mode. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press
this button again.
Stereo/Mono mode
Press the ST/PROG button on the RC to select Stereo or Mono.
OR press the SEL button until ST is selected, rotate VOL knob to select Stereo or Mono.
Local/Distance control
Press the LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
Or press the SEL button until LOC is selected, rotate the VOL knob to select LOC ON or LOC OFF mode. Local and
distance reception setting can facilitate the radio reception, depending on the location in which the radio is being used.
AF (Alternative Frequencies) function
Press the AF button on the panel to select AF ON or AF OFF.
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station
with the same PI (Program Identification) as the current station but with stronger signal strength.
www.DataShPeSet(4PUr.ocogmram Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode. Default setting is ON.
TA (Traffic Alarm) function
Press the TA button on the panel to select TA ON or TA OFF.
In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is
received the unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the
announcement. After the traffic announcement is over, it will return to the previous mode and volume level.
PTY (Program Type)
1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is shown.
16


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

2. Press PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to
select the desired program type (see the following table).
Button Number
1
2
3
4
5
6
Music group
Pop, Rock
Easy, Light
Classics
Jazz, Country
Nation, Oldies
Folk
Speech group
News, Affairs, Info
Sport, Educate, Drama
Culture, Science, Varied
Weather, Finance, Children
Social, Religion, Phone IN
Travel, Leisure, Document
3. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY
information is detected.
4. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not
found, NO PTY is flashed, then return to previous normal radio and PTY word disappears.
5. Press PTY button for the 3rd time to switch the PTY function off.
www.DataShPereets4sUS.cEomL button for 2 seconds to enter the menu mode. Press it repeatedly to choose the needed item: TA SEEK/ALARM
=> RETUNE L/S => MASK DPI/ALL.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program)
information for 5 seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK.
- TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not
the same station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost at
the current station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio
starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next
station with TP information.
- TA ALARM
17


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

During searching the radio does not retune but the double beep sound (alarm) is output.
RETUNE mode
To determine the initial time of automatic TA (Traffic Announcement) search.
There are 2 modes: RETUNE L and RETUNE L.
- RETUNE L: 90 seconds.
- RETUNE S: 30 seconds.
Note: Retune mode is active for TA SEEK mode only.
MASK mode
During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in the latter
case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the misjudgment of the radio
under interference. Rotate the VOL knob to select the desired mode: MASK DPI and MASK ALL.
- MASK DPI
To mask only the AF with different PI.
- MASK ALL
To mask both PI and strong signal non-RDS station.
www.DataSheet4U.com
18


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Discs operations
Disc glossary
PBC (PlayBack Control)
PBC is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive
software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
Title
The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record
several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2 and Title 3. You
can easy use the functions of looking-for.
Chapter
A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The chapter
contains a unit at least.
Track
It is the biggest component of VCD. Generally, every song of karaoke disc is a track.
Discs for playback
www.DataSheet4UT.choismunit can play disc types: CD-R/-RW/DVD±R/±RW.
Compatible with formats: DVD/ DVD±R/ DVCD/SVCD/VCD/CDDA/MP3/WMA/CD/Picture-CD/Photo-CD/CD-
R/CD-RW/JPEG/DivX(4.0/5.0)/MPEG4.
The following file types are supported:
Audio files: MP3 (*.mp3)
WMA (*.wma)
Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID)
MPEG 2(*.vob)
MPEG 1(*.dat)
Picture file: JPEG (*.jpg)
ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters
Max. Track number is 448
19


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Max. nested directory is 8 levels
The max. album number is 99
The max. length of each track is 99 minutes 59 seconds
Supported sampling frequency for MP3 disc: 8 KHz – 48 KHz (44.1 KHz preferably)
Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).
Following formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.
Open session discs are NOT supported.
Playing/pausing
When the disc has been already loaded press the PLAY/PAUSE button on the RC to start playback.
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Press and hold for 2 seconds the SET/PAU button on the panel or press shortly the PLAY/PAUSE on the RC to pause
the playback. Press again to resume the playback.
Stop playback
During playback press the STOP button to stop playback.
www.DataSheet4U.com
Playing the previous/next track
During playback press PREV button on the RC or on the panel to play the previous track.
Press NEXT button on the RC or on the panel to play the next track.
Scanning forward and backward
Press and hold PREV or NEXT button on the RC or on the panel to fast the playing in backward or forward direction. Release
the button when the desired location is found.
Slow playback (for DVD/VCD)
During DVD/VCD playback press SLOW button on the RC to execute the SLOW function. With each consecutive pressing
of the SLOW button, the playback speed decreases: X1/2 => X1/3 => X1/4 => X1/5 => X1/6 => X1/7 => Normal.
20


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

During slow forward, press the PLAY/PAUSE button to resume normal playback.
Repeat playback
Press and hold for 2 seconds the RPT button on the front panel or press shortly AMS/RPT button on the RC to repeat the
current track playback. Press again time to cancel.
Random playback
Press and hold for 2 seconds the RDM button on the front panel or press shortly LOC/RDM button on the RC to start the
random playing. Press again time to cancel.
Intro playback
You can play the beginning of every track for 10 seconds in sequence. Press and hold for 2 seconds INT button on the panel
to start intro play. Press again to cancel.
On-screen display
Press and hold for 2 seconds OSD button on the panel or shortly press OSD on the RC. The display will show the current
track/title/total amount of tracks/titles, current chapter/total amount of chapters, disc playback time elapsed.
www.DataShCeheta4nUg.cionmg size
Press ZOOM button on RC. The picture will be enlarged accordingly: X2, X3, X4, 1/2, 1/3, 1/4, OFF.
Selecting the audio language (for DVD only)
Press AUDIO button on RC or press the SEL button to select AUDIO and then rotate the VOL knob to select the audio
language (if DVD disc supports several audio languages).
Changing angle (for DVD only)
If DVD disc supports multi-angle playback, press ANGLE button on RC to play images in different camera angles. If discs
doesn't support multi-angle playback, this function will not work. If no operation within 1 second, angle description will
disappear.
21


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Selecting the subtitle (for DVD only)
1. Press the SUB-T button on RC repeatedly to select the subtitle.
2. Press ENTER to confirm.
Title playing (for DVD only)
Press TITLE button on the RC to activate the disc title list on the screen.
Press the cursor buttons on the RC to select the desired title or press the number buttons to insert the desired number
directly.
Press ENTER button or PLAY/PAUSE button to confirm the selected item and start playing.
PBC (Playback Control) function (for VCD only)
If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.
1. Press PBC/MENU button on the RC to activate PBC menu on screen during playback.
2. If the menu consists a list of titles, you can select a desired one using the cursor buttons on the RC or digit buttons.
3. The VCD starts playing the selected title automatically or press ENTER button to confirm the selected track for playback.
4. Press PBC/MENU button again to exit menu.
www.DataShGeeOt4TUO.cofmunction
During the playback press GOTO button on the RC to enter the search mode. Use the digital buttons and cursor buttons to
input the desired track/chapter number or time. Press ENTER to start its playing.
Program playing
During playback press ST/PROG button on the RC to open the program menu. Press the cursor buttons and number buttons
to set the sequence of playback.
TV type select (for DVD/VCD)
Press BND/NP/SUB button on the panel to select the TV type: NTSC => PAL => PAL60 => AUTO.
22


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Notes on MP3 and WMA
MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.
This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.
The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data
written by the method of packet write.
The unit can not read an MP3 file that has a file extension other than “.mp3”.
If you play a non- MP3 file that has the “.mp3” extension, you may hear some noise.
In this manual, we refer to what are called “MP3 file” and “folder” in PC terminology as “track” and “album”,
respectively.
Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per disc is
256.
The unit may not play tracks in the order of Track numbers.
The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.
When playing a disc of 8 kbps or “VBR”, the elapsed playing time in the display window will not be correct and also
the intro play may not function properly. “VBR”: Variable Bit Rate.
The unit supports the playback of WMA files. The playback of ID3 tags for WMA format is not guaranteed, it depends
www.DataSheet4Uo.ncovmersions and availability of Cyrillic alphabet.
WMA (Windows Media Audio) – music data compression format, created by Microsoft Corporation. This format uses
coding algorithm for compression of initial audio-record, greatly decreasing the file size, but, saving the good sound
quality even when the bit rate is low (for example, 64 Kbit/s).
Remember that the unit may not play the tracks in order they are written on disc.
23


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Notes on creating your own CD-Rs or CD-RWs containing MP3 files
To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed
bit rate o f 128 kbps.
DO NOT store more than 256 MP3 files per disc.
For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory
(folder).
When CD-R disc is used, playback is possible only for discs, which have been finalized.
Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio disc.
You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time
until the unit starts to play MP3 files.
With some CD-R or CD-RW media, data may not be properly written depending on their manufacturing quality. In this
case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended.
Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required.
Note that the unit may not play Tracks in the order that you wrote them to the disc.
www.DataSheet4U.com
24


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

System setup
Press SETUP button on the RC to display setup screen, use LEFT/RIGHT cursor buttons and ENTER button to select the
desired setup page: System, Language, Audio, Video, Speaker, Digital.
System setup
TV system
SYSTEM SETUP
Select the TV system in the setting menu (NTSC, PAL, PAL-M, PAL-N, AUTO).
Screen saver
The screen saver appears if disc stops for more than 3 minutes.
Original setting: On.
TV type
Select TV type to watch wide screen movies.
4:3 PS: For 4:3 TV, left and right edges will be cut.
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
4:3 LB: For 4:3 TV, black bars will appear on top and bottom.
16:9: For 16:9 wide screen TV.
Password
www.DataShOereitg4Uin.caol mpassword is 0000.
Rating
The rating of the disc is from 1 to 8:
1(KID SAFE) with the most limits when playing.
8 (ADULT) with the least limits when playing.
Original setting: 8.
Note: The rating can be selected only under the password unlocked status, and the limits can be worked only under the
password locked status.
Default
If this item is selected, the unit will return to original setting.
25


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Language setup
OSD language
Select the language to be used for the on-screen display.
LANGUAGE SETUP
Audio language
Select the language to be used for the audio. You can select a preferred audio from
those included on the DVD video disk. (The screen on your player may have
difference with the screen shown here)
Subtitle language
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
Select the language to be used for the Subtitles. You can select a preferred subtitle
from those included in the DVD Video disk.
(The screen on your player may have difference with the screen shown here)
Menu language
Select the language to be used for the Menu. You can select a preferred audio from those included on the DVD. (The screen
on your player may have difference with the screen shown here.)
Audio setup
Audio output
www.DataShSeeelte4cUt.cdoigmital output format.
SPDIF/OFF: There is no signal output from coaxial or optical output.
SPDIF/RAW: When the unit is connected with the amplifier by coaxial or optical
connecter, please select this mode.
SPDIF/PCM: When the unit is connected with the two-channel digital stereo
amplifier, please select this mode.
Key. Select key up/down according to your preference.
AUDIO SETUP
AUDIO OUT
KEY
26


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Video setup
Set a parameter with UP/DOWN cursor buttons: Brightness, Contrast, Hue,
Saturation, Sharpness.
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
Speaker setup
Downmix
LT/RT: The audio out is Left and Right channels format even if the original sound is
5.1 CH format.
Stereo: The audio out format is stereo even if the original sound is 5.1 CH format.
Vss: The audio out is virtual surround sounds (only for 5.1 CH player).
SPEAKER SETUP
DOWNMIX
www.DataSheet4U.com
Digital setup
Output mode
DIGITAL SETUP
Select the output mode:
LINE OUT: Compress the input signal. The volume is small.
RF REMOD: The volume is large.
OP MODE
DYNAMIC RANGE
Dynamic range
DUAL MONO
When you select the compressed mode as “line out”, select it to adjust the
compression proportion and get the different compressed effect. When select FULL,
the audio signal is minimum; when select OFF, the audio signal is maximum.
Dual mono: Select the audio channel from STEREO, MONO L, MONO R and MIX MONO.
27


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Anti-theft system
Remove the panel
1. Press POWER button to switch off the power of the unit.
2. Press OPEN button to flip down the panel.
3. Push the panel to the left and then pull it towards you.
4. Put it to the special box and take it with you.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.
www.DataSheet4U.com
28


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Cleaning
Discs holding
Dirty, scratched or warped discs may cause skip ping or noise.
Handle the disc only by the edges. To keep clean do not touch its surface.
Discs should be stored in their cases after use to avoid scratches.
Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during
summertime).
Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felt-tip pens,
may damage its surface.
Do not attach any seal, label or data protection sheet to either side of a disc.
Cleaning.
Discs cleaning
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs
www.DataShheaevte4Un.ocogmrooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth should remove must panicles.
Wipe in a straight motion from the center to the edge.
Never use thinner benzene, record cleaner or anti static spray on a compact disc. Such chemicals can damage its plastic
surface.
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth and then wipe clean.
29


H-CMD7073 Datasheet PDF
No Preview Available !

Click to Download PDF File for PC

Troubleshooting guide
Symptom
No power
Disc cannot be loaded.
Disc cannot be read.
No sound
The buttons do not work.
www.DataSheet4U.com
Sound skips.
The radio does not work,
the radio station automatic
selection does not work.
Cause
The car ignition is not on.
The fuse is blown.
Presence of disc inside the player.
Inserting the disc in upside down.
Compact disc is extremely dirty or defective.
Temperature inside the car is too high.
Volume is in minimum.
Wiring is not properly connected.
The built-in microcomputer is not operating
properly due to noise.
Front panel is not properly fix into its place.
The installation angle is more than 30
degrees.
The disc is extremely dirty or defective.
The antenna cable is not connected the signals
are too weak.
Solution
If the power supply is properly connected
to the car accessory switch the ignition key
to “ACC”.
Replace the fuse.
Remove the disc in the player then put a
new upward.
Insert the compact disc with the label
facing upward.
Clean the disc or try to play a new one.
Cool off until the ambient temperature
returns to normal.
Adjust volume to a desired level.
Check wiring connection.
Press the power button for about 10
seconds to reset the unit
Adjust the installation angle to less than 30
degrees.
Clean the compact disc/try to play a new
one.
Insert the antenna cable firmly select a
station manually.
30




Click to Download PDF File for PC





HOME