S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
Rev.2.0_00
HIGH RIPPLE-REJECTION LOW DROPOUT
MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
The S-1132 Series is a positive voltage regulator with a low
dropout voltage, high output voltage accuracy, and low
current consumption (300 mA output current) developed
based on CMOS technology.
A 0.1 µF small ceramic capacitor can be used. It operates
with low current consumption of 20 µA typ.
A built-in Output current protector prevents the load current
from exceeding the current capacitance of the output
transistor.
Compared with the conventional 300 mA output current
CMOS voltage regulators, high-density mounting is realized
by using the super-small SNT-6A(H) package and a 0.1µF
small ceramic capacitor.
Also, the low current consumption makes the S-1132 series
ideal for mobile devices.
„ Features
Output voltage:
Low ESR capacitor can be used:
Wide input voltage range:
High-accuracy output voltage:
Low dropout voltage:
Low current consumption:
Output current:
High ripple rejection:
Built-in overcurrent protector:
Built-in ON/OFF circuit:
Small package:
1.5 V to 5.5 V, selectable in 0.1 V steps.
A ceramic capacitor of 0.1 µF or more can be used for the output capacitor.
2.0 V to 6.5 V
±1.0%
130 mVDtyapta. S(3h.0eeVt4ouUt.pcuotmproduct, IOUT = 100 mA)
During operation: 20 µA typ., 40 µA max.
During shutdown: 0.01 µA typ., 1.0 µA max.
300 mA output is possible (at VIN VOUT(S) + 1.0 V)*1
70 dB typ. (at 1.0 kHz)
Overcurrent of output transistor can be restricted.
Ensures long battery life.
SOT-23-5, SOT-89-5, SNT-6A(H)
*1. Attention should be paid to the power dissipation of the package when the output current is large.
DataShee
„ Applications
Power supply for battery-powered devices
Power supply for personal communication devices
Power supply for home electric/electronic appliances
Power supply for cellular phones
„ Package
Package Name
SOT-23-5
SOT-89-5
SNT-6A(H)
Package
MP005-A
UP005-A
PI006-A
Drawing Code
Tape
MP005-A
UP005-A
PI006-A
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
Reel
MP005-A
UP005-A
PI006-A
1


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Block Diagram
VIN
*1
VOUT
Overcurrent
protector
ON/OFF
ON/OFF
circuit
+
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 1
et4U.com
DataSheet4U.com
DataShee
DataSheet4U.com
2
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Product Name Structure
The product types, output voltage, and package types for the S-1132 Series can be selected at the user’s request.
Refer to the “1. Product name” for the meanings of the characters in the product name and “2. Product name list
for the full product names.
1. Product name
1. 1 Package SOT-23-5 and SOT-89-5
S-1132
x
xx – xxxx
Package name (abbreviation) and packing specifications*1
M5T1: SOT-23-5, Tape
U5T1: SOT-89-5, Tape
Output voltage
15 to 55
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)
Product type*2
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the taping specifications at the end of this book.
*2. Refer to 3. Shutdown pin (ON/OFF pin) in the “Operation”.
et4U.com
1. 2 Package SNT-6A(H)
S-1132
x
xx – I6T2
G
DataShFeixeetd4U.com
Package name (abbreviation) and packing specifications*1
I6T2: SNT-6A(H), Tape
Output voltage
15 to 55
(e.g., when the output voltage is 1.5 V, it is expressed as 15.)
Product type*2
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the taping specifications at the end of this book.
*2. Refer to 3. Shutdown pin (ON/OFF pin) in the “Operation”.
DataShee
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
3


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
et4U.com
2. Product name list
Table 1
Output Voltage
SOT-23-5
SOT-89-5
1.5 V ±1.0%
S-1132B15-M5T1
S-1132B15-U5T1
1.6 V ±1.0%
S-1132B16-M5T1
S-1132B16-U5T1
1.7 V ±1.0%
S-1132B17-M5T1
S-1132B17-U5T1
1.8 V ±1.0%
S-1132B18-M5T1
S-1132B18-U5T1
1.9 V ±1.0%
S-1132B19-M5T1
S-1132B19-U5T1
2.0 V ±1.0%
S-1132B20-M5T1
S-1132B20-U5T1
2.1 V ±1.0%
S-1132B21-M5T1
S-1132B21-U5T1
2.2 V ±1.0%
S-1132B22-M5T1
S-1132B22-U5T1
2.3 V ±1.0%
S-1132B23-M5T1
S-1132B23-U5T1
2.4 V ±1.0%
S-1132B24-M5T1
S-1132B24-U5T1
2.5 V ±1.0%
S-1132B25-M5T1
S-1132B25-U5T1
2.6 V ±1.0%
S-1132B26-M5T1
S-1132B26-U5T1
2.7 V ±1.0%
S-1132B27-M5T1
S-1132B27-U5T1
2.8 V ±1.0%
S-1132B28-M5T1
S-1132B28-U5T1
2.9 V ±1.0%
S-1132B29-M5T1
S-1132B29-U5T1
3.0 V ±1.0%
S-1132B30-M5T1
S-1132B30-U5T1
3.1 V ±1.0%
S-1132B31-M5T1
S-1132B31-U5T1
3.2 V ±1.0%
S-1132B32-M5T1
S-1132B32-U5T1
3.3 V ±1.0%
S-1132B33-M5T1
S-1132B33-U5T1
3.4 V ±1.0%
S-1132B34-M5T1
S-1132B34-U5T1
3.5 V ±1.0%
S-1132BD3a5t-aMS5hTe1et4U.com S-1132B35-U5T1
3.6 V ±1.0%
S-1132B36-M5T1
S-1132B36-U5T1
3.7 V ±1.0%
S-1132B37-M5T1
S-1132B37-U5T1
3.8 V ±1.0%
S-1132B38-M5T1
S-1132B38-U5T1
3.9 V ±1.0%
S-1132B39-M5T1
S-1132B39-U5T1
4.0 V ±1.0%
S-1132B40-M5T1
S-1132B40-U5T1
4.1 V ±1.0%
S-1132B41-M5T1
S-1132B41-U5T1
4.2 V ±1.0%
S-1132B42-M5T1
S-1132B42-U5T1
4.3 V ±1.0%
S-1132B43-M5T1
S-1132B43-U5T1
4.4 V ±1.0%
S-1132B44-M5T1
S-1132B44-U5T1
4.5 V ±1.0%
S-1132B45-M5T1
S-1132B45-U5T1
4.6 V ±1.0%
S-1132B46-M5T1
S-1132B46-U5T1
4.7 V ±1.0%
S-1132B47-M5T1
S-1132B47-U5T1
4.8 V ±1.0%
S-1132B48-M5T1
S-1132B48-U5T1
4.9 V ±1.0%
S-1132B49-M5T1
S-1132B49-U5T1
5.0 V ±1.0%
S-1132B50-M5T1
S-1132B50-U5T1
5.1 V ±1.0%
S-1132B51-M5T1
S-1132B51-U5T1
5.2 V ±1.0%
S-1132B52-M5T1
S-1132B52-U5T1
5.3 V ±1.0%
S-1132B53-M5T1
S-1132B53-U5T1
5.4 V ±1.0%
S-1132B54-M5T1
S-1132B54-U5T1
5.5 V ±1.0%
S-1132B55-M5T1
S-1132B55-U5T1
Remark Please contact the SII marketing department for products with type A products.
SNT-6A(H)
S-1132B15-I6T2G
S-1132B16-I6T2G
S-1132B17-I6T2G
S-1132B18-I6T2G
S-1132B19-I6T2G
S-1132B20-I6T2G
S-1132B21-I6T2G
S-1132B22-I6T2G
S-1132B23-I6T2G
S-1132B24-I6T2G
S-1132B25-I6T2G
S-1132B26-I6T2G
S-1132B27-I6T2G
S-1132B28-I6T2G
S-1132B29-I6T2G
S-1132B30-I6T2G
S-1132B31-I6T2G
S-1132B32-I6T2G
S-1132B33-I6T2G
S-1132B34-I6T2G
S-1132B35-I6T2G
S-1132B36-I6T2G
S-1132B37-I6T2G
S-1132B38-I6T2G
S-1132B39-I6T2G
S-1132B40-I6T2G
S-1132B41-I6T2G
S-1132B42-I6T2G
S-1132B43-I6T2G
S-1132B44-I6T2G
S-1132B45-I6T2G
S-1132B46-I6T2G
S-1132B47-I6T2G
S-1132B48-I6T2G
S-1132B49-I6T2G
S-1132B50-I6T2G
S-1132B51-I6T2G
S-1132B52-I6T2G
S-1132B53-I6T2G
S-1132B54-I6T2G
S-1132B55-I6T2G
DataShee
DataSheet4U.com
4
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Pin Configuration
SOT-23-5
Top view
54
123
Table 2
Pin No.
1
2
3
4
5
Symbol
VIN
VSS
ON/OFF
NC*1
VOUT
Description
Input voltage pin
GND pin
Shutdown pin
No connection
Output voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
Figure 2
et4U.com
SOT-89-5
Top view
54
1 23
Figure 3
Table 3
Pin No.
Symbol
1 VOUT
2 VSS
3 NC*1
4 DataShOeNe/tO4UFF.com
5 VIN
Description
Output voltage pin
GND pin
No connection
Shutdown pin
Input voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
DataShee
SNT-6A(H)
Top view
16
25
34
Figure 4
Table 4
Pin No.
1
2
3
4
5
6
Symbol
VOUT
VSS
NC*1
ON/OFF
VSS
VIN
Description
Output voltage pin
GND pin
No connection
Shutdown pin
GND pin
Input voltage pin
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
DataSheet4U.com
D a t a 4SU .h ce oe mt
Seiko Instruments Inc.
5


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Absolute Maximum Ratings
Table 5
Item Symbol
Input voltage
Output voltage
Power dissipation
SOT-23-5
SOT-89-5
VIN
VON/OFF
VOUT
PD
SNT-6A(H)
Operating ambient temperature
Storage ambient temperature
*1. At mounted on printed circuit board
Topr
Tstg
[Mounted Board]
(1) Board size: 114 mm x 76 mm x 1.6t mm
(2) Board name: JEDEC STANDARD51-7
(Ta = 25°C unless otherwise specified)
Absolute Maximum Rating
Unit
VSS 0.3 to VSS + 7
VSS 0.3 to VIN + 0.3
VSS 0.3 to VIN + 0.3
300
V
mW
500
500*1
40 to + 85
°C
40 to + 125
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
600
SNT-6A(H)
et4U.com
400 DataSheet4U.com
DataShee
200
0
0 50 100 150
Ambient Temperature (Ta) [°C]
Figure 5 Power Dissipation of Package (Mounted on Printed Circuit Board)
DataSheet4U.com
6
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Electrical Characteristics
et4U.com
Item
Output voltage*1
Output current*2
Dropout voltage*3
Line regulation
Load regulation
Output voltage
temperature coefficient*4
Current consumption
during operation
Current consumption
during shutdown
Input voltage
Shutdown pin
input voltage “H”
Shutdown pin
input voltage “L”
Shutdown pin
input current “H”
Shutdown pin
input current “L”
Ripple rejection
Short-circuit current
Symbol
VOUT(E)
IOUT
Vdrop
VOUT1
VINVOUT
VOUT2
VOUT
Ta VOUT
ISS1
ISS2
VIN
Table 6
Conditions
VIN = VOUT(S) + 1.0 V, IOUT = 100 mA
VIN VOUT(S) + 1.0 V
IOUT = 100 mA
1.5 V VOUT(S) 1.9 V
2.0 V VOUT(S) 2.4 V
2.5 V VOUT(S) 2.9 V
3.0 V VOUT(S) 3.2 V
3.3 V VOUT(S) 5.5 V
VOUT(S) + 0.5 V VIN 6.5 V,
IOUT = 100 mA
VIN = VOUT(S) + 1.0 V,
1.0 mA IOUT 100 mA
VIN = VOUT(S) + 1.0 V, IOUT = 30 mA,
40°C Ta 85°C
VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON,
no load
VIN = VOUT(S) + 1.0 V, ON/OFF pin = OFF,
no load
(Ta = 25°C unless otherwise specified)
Min.
Typ.
Max.
Unit
Test
Circuit
VOUT(S)
× 0.99
300*5
VOUT(S)
VOUT(S)
× 1.01
V
mA
1
3
0.50 0.54 0.58 V
1
0.15 0.23
0.14 0.21
0.13 0.19
0.10 0.15
0.01 0.2 % / V
15 40 mV
±100
ppm
/ °C
20 40 µA 2
0.01 1.0
2.0 6.5 V
VSH VIN = VOUT(SD) +a1ta.0SVh,eReLt4=U1..c0okm
VSL VIN = VOUT(S) + 1.0 V, RL = 1.0 k
1.5  
  0.25
4 DataShee
ISH VIN = 6.5 V, VON/OFF = 6.5 V
0.1
0.1 µA
ISL VIN = 6.5 V, VON/OFF = 0 V
0.1
RR
VIN = VOUT(S) + 1.0 V,
f = 1.0 kHz,
1.5 V VOUT(S) 3.0 V
Vrip = 0.5 Vrms,
IOUT = 50 mA
3.1 V VOUT(S) 5.5 V
Ishort
VIN = VOUT(S) + 1.0 V, ON/OFF pin = ON,
VOUT = 0 V
70
65
250
0.1
dB
mA
5
3
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
7


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
*1. VOUT(S): Specified output voltage
VOUT(E): Actual output voltage at the fixed load
The output voltage when fixing IOUT(= 100 mA) and inputting VOUT(S) + 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 (VOUT3 × 0.98)
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. The change in temperature [mV/°C] is calculated using the following equation.
[ ] [ ] [ ]VOUT
Ta
mV/ °C
= V*1
OUT(S)
V
*2 ×
VOUT
Ta VOUT
ppm/ °C
*3 ÷ 1000
*1. The change in temperature of the output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
et4U.com
DataSheet4U.com
DataShee
DataSheet4U.com
8
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Test Circuits
1.
VIN VOUT
ON/OFF
Set to
power ON
VSS
+A
+
V
2.
3.
et4U.com
4.
Figure 6
A VIN
VOUT
ON/OFF
VSS
Set to
VIN or GND
Figure 7
VIN VOUT
+
A
ON/OFF
Set to
power ON
VSS
+
V
DataSheet4U.com
Figure 8
VIN VOUT
+
A ON/OFF
VSS
+
V
RL
DataShee
Figure 9
5.
VIN VOUT
ON/OFF
Set to
Power ON
VSS
+
V RL
Figure 10
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
9


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Standard Circuit
INPUT
CIN*1
VIN VOUT
ON/OFF
VSS
OUTPUT
CL*2
Single GND
GND
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor of 0.1 µF or more can be used for CL.
Figure 11
Caution The above connection diagram and constant will not guarantee successful operation. Perform
thorough evaluation using the actual application to set the constant.
„ Application Conditions
et4U.com
Input capacitor (CIN):
Output capacitor (CL):
ESR of output capacitor:
0.1 µF or moreDataSheet4U.com
0.1 µF or more
2.0 or less
Caution A general series regulator may oscillate, depending on the external components selected. Check
that no oscillation occurs with the application using the above capacitor.
DataShee
„ Selection of Input and Output Capacitors (CIN, CL)
The S-1132 Series requires an output capacitor between the VOUT and VSS pins for phase compensation. Operation is
stabilized by a ceramic capacitor with an output capacitance of 0.1 µF or more in the entire temperature range. However,
when using an OS capacitor, tantalum capacitor, or aluminum electrolytic capacitor, a ceramic capacitor with a capacitance
of 0.1 µF or more and an ESR of 2.0 or less is required.
The value of the output overshoot or undershoot transient response varies depending on the value of the output capacitor.
The required capacitance of the input capacitor differs depending on the application.
The recommended value for an application is 0.1 µF or more for CIN and 0.1 µF or more for CL; however, when selecting the
output capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device.
DataSheet4U.com
10
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Explanation of Terms
1. Low dropout voltage regulator
The low dropout voltage regulator is a voltage regulator whose dropout voltage is low due to its built-in low on-
resistance transistor.
2. Low ESR
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1132 Series enables use of a low ESR
capacitor, such as a ceramic capacitor, for the output-side capacitor CL. A capacitor whose ESR is 2.0 or less can
be used.
3. Output voltage (VOUT)
The accuracy of the output voltage is ensured at ±1.0% under the specified conditions of fixed input voltage*1, fixed
output current, and fixed temperature.
*1. Differs depending on the product.
Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range
of the output voltage. Please see the electrical characteristics and attached characteristics data
for details.
4.
Line
regulation

V OUT1
VIN VOUT

Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
et4U.com
5. Load regulation (VOUT2)
Indicates the dependency of the output voltaDgeatoanSthheeotu4tUpu.ct ocmurrent. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
DataShee
6. Dropout voltage (Vdrop)
Indicates the difference between the input voltage VIN1, which is the input voltage (VIN) at the point where the output
voltage has fallen to 98% of the output voltage value VOUT3 after VIN was gradually decreased from VIN = VOUT(S) +
1.0 V, and the output voltage at that point (VOUT3 × 0.98).
Vdrop = VIN1 (VOUT3 × 0.98)
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
11


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
7.
Temperatur
e coefficien t of
output
voltage

VOUT
Ta VOUT

The shadowed area in Figure 12 is the range where VOUT varies in the operating temperature range when the
temperature coefficient of the output voltage is ±100 ppm/°C.
Ex. S-1132B28 Typ.
VOUT
[V]
+0.28 mV / °C
VOUT(E)*1
0.28 mV / °C
et4U.com
40 25
85 Ta [°C]
*1. VOUT(E) is the value of the output voltage measured at 25°C.
Figure 12
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
[ ] [ ]VOUT
Ta
mV/°C
= V*1
OUT(S)
V
*2
×
VOUT
Ta VOUT
[ppDma/t°aCS]*h3 e÷e1t040U0.com
*1. Change in temperature of output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
DataShee
DataSheet4U.com
12
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Operation
1. Basic operation
Figure 13 shows the block diagram of the S-1132 Series.
The error amplifier compares the reference voltage (Vref) with Vfb, which is the output voltage resistance-divided by
feedback resistors Rs and Rf. It supplies the output transistor with the gate voltage necessary to ensure a certain
output voltage free of any fluctuations of input voltage and temperature.
VIN
Current
supply
Vref
Error
amplifier
+
Reference
voltage
*1
Rf
Vfb
Rs
VOUT
VSS
*1. Parasitic diode
et4U.com
2. Output transistor
Figure 13
DataSheet4U.com
DataShee
The S-1132 Series uses a low on-resistance P-channel MOS FET as the output transistor.
Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to inverse
current flowing from the VOUT pin through a parasitic diode to the VIN pin.
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
13


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
3. Shutdown pin (ON/OFF pin)
This pin starts and stops the regulator.
When the ON/OFF pin is set to the shutdown level, the operation of all internal circuits stops, and the built-in P-channel
MOS FET output transistor between the VIN pin and VOUT pin is turned off to substantially reduce the current
consumption. The VOUT pin becomes the VSS level due to the internally divided resistance of several hundreds k
between the VOUT pin and VSS pin.
The structure of the ON/OFF pin is as shown in Figure 14. Since the ON/OFF pin is neither pulled down nor pulled up
internally, do not use it in the floating state. In addition, note that the current consumption increases if a voltage of 0.3
V to VIN – 0.3 V is applied to the ON/OFF pin. When the ON/OFF pin is not used, connect it to the VSS pin if the logic
type is “A” and to the VIN pin if it is “B”.
Table 7
Logic Type
A
A
B
B
ON/OFF Pin
“L”: Power on
“H”: Power off
“L”: Power off
“H”: Power on
Internal Circuits
Operating
Stopped
Stopped
Operating
VOUT Pin Voltage
Set value
VSS level
VSS level
Set value
Current Consumption
ISS1
ISS2
ISS2
ISS1
VIN
et4U.com
ON/OFF
VSS
Figure 14
DataSheet4U.com
DataShee
DataSheet4U.com
14
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
„ Precautions
Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low. When mounting
an output capacitor between the VOUT and VSS pins (CL) and a capacitor for stabilizing the input between VIN and
VSS pins (CIN), the distance from the capacitors to these pins should be as short as possible.
Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or less).
Note that the output voltage may increase due to driver leakage when a series regulator is used at high
temperatures.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for this IC. However, be sure to perform sufficient evaluation under the actual usage
conditions for selection, including evaluation of temperature characteristics.
Input capacitor (CIN):
Output capacitor (CL):
Equivalent series resistance (ESR):
0.1 µF or more
0.1 µF or more
2.0 or less
et4U.com
The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitor is small
or an input capacitor is not connected.
If the capacitance of the IC’s output block is small, the power supply fluctuation and load fluctuation characteristics
become worse. It is therefore important to sufficiently evaluate the output voltage fluctuation in the actual
equipment.
When the capacitance of the IC’s output block is small, if the power supply suddenly increases sharply, a
momentary overshoot may be output. It is therefore important to sufficiently evaluate the output voltage at power
application in the actual equipment.
The application conditions for the input voltage, output voltage, and load current should not exceed the package
power dissipation.
DataSheet4U.com
DataShee
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table 6 in the
electrical characteristics and footnote *5) of the table.
SII claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
15


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Typical Characteristics
(1) Output Voltage vs. Output Current (When Load Current Increases) (Ta = 25°C)
S-1132B15
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
VIN = 2.0V
2.5V
6.5V
100 200 300 400 500 600
IOUT [mA]
S-1132B30
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0
VIN = 3.5V
4.0V
6.5V
100 200 300 400 500 600
IOUT [mA]
et4U.com
S-1132B50
6
5
4
3
2
1
0
0
VIN = 5.5V
6.0V
6.5V
Remark In determining the output current, attention should
be paid to the following.
1. The minimum output current value and
footnote *5 specified in Table 5 in the
Electrical Characteristics
2. The package power dissipation
100 200 300 400 500 600
IOUT [mA]
DataSheet4U.com
(2) Output Voltage vs. Input Voltage (Ta = 25°C)
S-1132B15
1.6
1.5
1.4
IOUT = 1mA
1.3 30mA
1.2 50mA
1.1 100mA
1.0
1.0 1.5 2.0 2.5 3.0 3.5
VIN [V]
S-1132B30
3.1
3.0
2.9 IOUT = 1mA
2.8 30mA
2.7 50mA
2.6 100mA
2.5
2.5 3.0 3.5 4.0 4.5 5.0
VIN [V]
S-1132B50
5.5
5.0 IOUT = 1mA
4.5
4.0 30mA
3.5
50mA
100mA
3.0
2.5
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
VIN [V]
DataShee
DataSheet4U.com
16
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
(3) Dropout Voltage vs. Output Current
S-1132B15
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
85°C
25°C
-40°C
50 100 150 200 250 300 350
IOUT [mA]
S-1132B50
0.6
0.5
0.4
0.3
0.2
0.1
0
0
85°C
25°C
-40°C
50 100 150 200 250 300 350
IOUT [mA]
S-1132B30
0.6
0.5
0.4
0.3
0.2
0.1
0
0
85°C
25°C
-40°C
50 100 150 200 250 300 350
IOUT [mA]
et4U.com
(4) Dropout Voltage vs. Set Output Voltage
0.8
0.7 300mA
0.6
0.5
0.4
0.3
0.2
0.1
100mA
3500mmAA
0 1mA
01
234
VOTA [V]
DataSheet4U.com
56
DataShee
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
17


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
(5) Output Voltage vs. Ambient Temperature
S-1132B15
1.60
1.58
1.56
1.54
1.52
1.50
1.48
1.46
1.44
1.42
1.40
-40 -25
0 25 50
Ta [°C]
S-1132B50
5.3
5.2
5.1
5.0
4.9
4.8
4.7
-40 -25
0 25 50
Ta [°C]
75 85
75 85
S-1132B30
3.20
3.15
3.10
3.05
3.00
2.95
2.90
2.85
2.80
-40 -25
0 25 50
Ta [°C]
75 85
et4U.com (6) Current Consumption vs. Input Voltage
DataSheet4U.com
S-1132B15
20
18
16
14
85°C 25°C -40°C
12
10
8
6
4
2
0
01 23 4567
VIN [V]
S-1132B30
25
20
15
10
5
0
0
85°C 25°C
-40°C
1 23 456
VIN [V]
7
S-1132B50
25
20
85°C 25°C
15 -40°C
10
5
0
01 23 4567
VIN [V]
DataShee
DataSheet4U.com
18
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
(7) Ripple Rejection (Ta = 25°C)
S-1132B15
100
80
60
40
20
0
10
VIN = 2.5 V, COUT =0.1 µF
50mA
100mA
IOUT = 1mA
100 1K 10K 100K 1M
Frequency [Hz]
S-1132B30
100
80
60
40
20
0
10
S-1132B50
100
80
60
40
20
VIN = 6.0 V, COUT =0.1 µF
50mA
100mA
IOUT = 1mA
et4U.com
0
10
100 1K 10K 100K 1M
Frequency [Hz]
DataSheet4U.com
VIN = 4.0 V, COUT = 0.1 µF
50mA
100mA
IOUT = 1mA
100 1K 10K 100K 1M
Frequency [Hz]
DataShee
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
19


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Reference Data
(1) Input Transient Response Characteristics (Ta = 25°C)
S-1132B15
IOUT = 100 mA, tr = tf = 5.0 µs, COUT = 0.1 µF, CIN = 0.1 µF
1.62
1.60
VIN
4.0
3.5
1.58 3.0
1.56 2.5
1.54 2.0
1.52
1.50
VOUT
1.5
1.0
1.48 0.5
1.46 0
-20 0 20 40 60 80 100 120140 160 180
t [µs]
S-1132B30
IOUT = 100 mA, tr = tf = 5.0 µs, COUT = 0.1 µF, CIN = 0.1 µF
3.16 6
3.12
VIN
5
3.08 4
3.04
3.00
VOUT
3
2
2.96 1
2.92 0
-20 0 20 40 60 80 100 120140 160 180
t [µs]
(2) Load Transient Response Characteristics (Ta = 25°C)
et4U.com
S-1132B15
VIN = 2.5 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 50 100 mA
1.9 150
S-1132B30
VIN = 4.0 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 50 100 mA
3.8 150
1.8
1.7 IOUT
100 3.6
50 3.4 IOUT
100
50
1.6
1.5 VOUT
0 3.2
-50 3.0 VOUT
0
-50
1.4
-100
2.8
-100
1.3 D-a15ta0Sheet4U.c2o.m6 -150
-40 -20 0 20 40 60 80 100120 140 160
-40 -20 0 20 40 60 80 100120 140 160
t [µs]
t [µs]
S-1132B50
VIN =6.0 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 50 100 mA
5.8 150
5.6
5.4 IOUT
100
50
5.2
5.0 VOUT
0
-50
4.8 -100
4.6 -150
-40 -20 0 20 40 60 80 100120 140 160
t [µs]
DataShee
DataSheet4U.com
20
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
(3) ON / OFF Pin Transient Response Characteristics (Ta = 25°C)
S-1132B15
VIN = 2.5 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 80 mA
10 6
8 VON/OFF
6
4
2
40
2
0 VOUT
-2
-4
-2 -6
-0.4 -0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
S-1132B30
VIN = 4.0 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 80 mA
10 6
8 VON/OFF
4
62
40
2
0 VOUT
-2
-4
-2 -6
-0.4 -0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
S-1132B50
VIN = 6.0 V, COUT = 0.1 µF, CIN = 0.1 µF, IOUT = 80 mA
14
12
VON/OFF
8
6
10 4
82
60
4
2
0
VOUT
-2
-4
-6
-2 -8
-0.4 -0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
t [ms]
et4U.com (4) Input transient response characteristics - CapDaactitaySVhaeleute4cUh.acroamcteristics (Ta = 25°C)
S-1132B15
VIN = 2.5 V 4.5 V, tr = 5 µF, IOUT = 100 mA
1.70
1.65
1.60
1.55
1.50
VIN
VOUT
C = 1.0µ
1.45 C = 0.1µ
1.40
-80 -60 -40 -20 0 20 40 60
t [µs]
6
4
2
0
-2
-4
-6
80
VIN = 4.5 V 2.5 V, tr = 5 µF, IOUT = 100 mA
1.8 VIN
1.7
1.6
1.5 VOUT
1.4 C = 1.0µ
1.3 C = 0.1µ
1.2
-80 -60 -40 -20 0 20 40 60
t [µs]
6
4
2
0
-2
-4
-6
80
DataShee
(5) Load transient response characteristics - Capacity Value characteristics (Ta = 25°C)
S-1132B15
VIN = 2.5 V, IOUT = 1 50 mA
2.2
100
2.0
1.8 IOUT
1.6 VOUT
1.4
C = 1.0µ
50
0
1.2 C = 0.1µ
1.0
-100 -80 -60 -40 -20 0 20 40 60 80 100
t [µs]
VIN = 2.5 V, IOUT = 50 1 mA
2.2
2.0 IOUT
100
50
1.8
1.6 VOUT
1.4
1.2
C = 1.0µ
C = 0.1µ
0
1.0
-200 -150 -100 -50 0 50 100 150 200
t [µs]
DataSheet4U.com
Seiko Instruments Inc.
21
DataSheet4 U .com


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
„ Marking Specification
(1) SOT-23-5
SOT-23-5
Top view
54
(1) to (3)
(4)
: Product code (Refer to Product name vs. Product code)
: Lot number
(1) (2) (3) (4)
1 23
et4U.com
Product name vs. Product code
Product name
Product code
(1) (2) (3)
Product name
S-1132B15-M5T1
QLA
S-1132B36-M5T1
S-1132B16-M5T1
QLB
S-1132B37-M5T1
S-1132B17-M5T1
QLC
S-1132B38-M5T1
S-1132B18-M5T1
S-1132B19-M5T1
QLD
S-1132B39-M5T1
Q L DaEtaSheet4U.coSm-1132B40-M5T1
S-1132B20-M5T1
QL F
S-1132B41-M5T1
S-1132B21-M5T1
QLG
S-1132B42-M5T1
S-1132B22-M5T1
QLH
S-1132B43-M5T1
S-1132B23-M5T1
QL
I
S-1132B44-M5T1
S-1132B24-M5T1
QL J
S-1132B45-M5T1
S-1132B25-M5T1
QLK
S-1132B46-M5T1
S-1132B26-M5T1
QL L
S-1132B47-M5T1
S-1132B27-M5T1
QLM
S-1132B48-M5T1
S-1132B28-M5T1
QLN
S-1132B49-M5T1
S-1132B29-M5T1
QLO
S-1132B50-M5T1
S-1132B30-M5T1
QLP
S-1132B51-M5T1
S-1132B31-M5T1
QLQ
S-1132B52-M5T1
S-1132B32-M5T1
QLR
S-1132B53-M5T1
S-1132B33-M5T1
QLS
S-1132B54-M5T1
S-1132B34-M5T1
QL T
S-1132B55-M5T1
S-1132B35-M5T1
QLU
Remark Please contact the SII marketing department for products with type A products.
Product code
(1) (2) (3)
QLV
Q LW
QLX
QLY
QL Z
QMA
QMB
QMC
QMD
QME
QM F
QMG
QMH
QM
I
QM J
QMK
QM L
QMM
QMN
QMO
DataShee
DataSheet4U.com
22
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.0_00
S-1132 Series
(2) SOT-89-5
SOT-89-5
Top view
54
(1) to (3)
(4) to (6)
: Product code (Refer to Product name vs. Product code)
: Lot number
1 23
et4U.com
Product name vs. Product code
Product name
Product code
(1) (2) (3)
Product name
S-1132B15-U5T1
QLA
S-1132B36-U5T1
S-1132B16-U5T1
QLB
S-1132B37-U5T1
S-1132B17-U5T1
QLC
S-1132B38-U5T1
S-1132B18-U5T1
QLD
S-1132B39-U5T1
S-1132B19-U5T1
QLE
S-1132B40-U5T1
S-1132B20-U5T1
QL F
S-1132B41-U5T1
S-1132B21-U5T1
S-1132B22-U5T1
Q L DaGtaSheet4U.coSm-1132B42-U5T1
QLH
S-1132B43-U5T1
S-1132B23-U5T1
QL
I
S-1132B44-U5T1
S-1132B24-U5T1
QL J
S-1132B45-U5T1
S-1132B25-U5T1
QLK
S-1132B46-U5T1
S-1132B26-U5T1
QL L
S-1132B47-U5T1
S-1132B27-U5T1
QLM
S-1132B48-U5T1
S-1132B28-U5T1
QLN
S-1132B49-U5T1
S-1132B29-U5T1
QLO
S-1132B50-U5T1
S-1132B30-U5T1
QLP
S-1132B51-U5T1
S-1132B31-U5T1
QLQ
S-1132B52-U5T1
S-1132B32-U5T1
QLR
S-1132B53-U5T1
S-1132B33-U5T1
QLS
S-1132B54-U5T1
S-1132B34-U5T1
QL T
S-1132B55-U5T1
S-1132B35-U5T1
QLU
Remark Please contact the SII marketing department for products with type A products.
Product code
(1) (2) (3)
QLV
Q LW
QLX
QLY
QL Z
QMA
QMB
QMC
QMD
QME
QM F
QMG
QMH
QM
I
QM J
QMK
QM L
QMM
QMN
QMO
DataShee
DataSheet4U.com
DataSheet4 U .com
Seiko Instruments Inc.
23


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1132 Series
Rev.2.0_00
(3) SNT-6A(H)
SNT-6A(H)
Top view
1
2
3
6
5
4
(1) to (3)
(4) to (6)
: Product code (Refer to Product name vs. Product code)
: Lot number
et4U.com
Product name vs. Product code
Product name
Product code
(1) (2) (3)
Product name
S-1132B15-I6T2G
QLA
S-1132B36-I6T2G
S-1132B16-I6T2G
QLB
S-1132B37-I6T2G
S-1132B17-I6T2G
QLC
S-1132B38-I6T2G
S-1132B18-I6T2G
QLD
S-1132B39-I6T2G
S-1132B19-I6T2G
QLE
S-1132B40-I6T2G
S-1132B20-I6T2G
QL F
S-1132B41-I6T2G
S-1132B21-I6T2G
S-1132B22-I6T2G
Q
Q
L
L
DaGHtaSheet4U.coSSm--11113322BB4432--II66TT22GG
S-1132B23-I6T2G
QL
I
S-1132B44-I6T2G
S-1132B24-I6T2G
QL J
S-1132B45-I6T2G
S-1132B25-I6T2G
QLK
S-1132B46-I6T2G
S-1132B26-I6T2G
QL L
S-1132B47-I6T2G
S-1132B27-I6T2G
QLM
S-1132B48-I6T2G
S-1132B28-I6T2G
QLN
S-1132B49-I6T2G
S-1132B29-I6T2G
QLO
S-1132B50-I6T2G
S-1132B30-I6T2G
QLP
S-1132B51-I6T2G
S-1132B31-I6T2G
QLQ
S-1132B52-I6T2G
S-1132B32-I6T2G
QLR
S-1132B53-I6T2G
S-1132B33-I6T2G
QLS
S-1132B54-I6T2G
S-1132B34-I6T2G
QL T
S-1132B55-I6T2G
S-1132B35-I6T2G
QLU
Remark Please contact the SII marketing department for products with type A products.
Product code
(1) (2) (3)
QLV
Q LW
QLX
QLY
QL Z
QMA
QMB
QMC
QMD
QME
QM F
QMG
QMH
QM
I
QM J
QMK
QM L
QMM
QMN
QMO
DataShee
DataSheet4U.com
24
DataSheet4 U .com
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
et4U.com
2.9±0.2
1.9±0.2
54
123
0.16
+0.1
-0.06
0.95±0.1
DataSheet4U.com
0.4±0.1
DataShee
DataSheet4U.com
DataSheet4 U .com
No. MP005-A-P-SD-1.2
TITLE
No.
SCALE
UNIT
SOT235-A-PKG Dimensions
MP005-A-P-SD-1.2
mm
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
+0.1
ø1.5 -0
2.0±0.05
4.0±0.1(10 pitches:40.0±0.2)
0.25±0.1
et4U.com
DataSheet4U.com
DataSheet4 U .com
ø1.0
+0.2
-0
4.0±0.1
3.2±0.2
1.4±0.2
321
45
DataSheet4U.com
DataShee
Feed direction
No. MP005-A-C-SD-2.1
TITLE
No.
SCALE
UNIT
SOT235-A-Carrier Tape
MP005-A-C-SD-2.1
mm
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
12.5max.
et4U.com
Enlarged drawing in the central part
DataSheet4U.com
ø13±0.2
9.0±0.3
DataShee
(60°) (60°)
No. MP005-A-R-SD-1.1
DataSheet4U.com
DataSheet4 U .com
TITLE
No.
SCALE
UNIT
SOT235-A-Reel
MP005-A-R-SD-1.1
QTY.
3,000
mm
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
4.5±0.1
1.6±0.2
54
12
3
1.5±0.1 1.5±0.1
1.5±0.1
0.4±0.05
et4U.com
0.4±0.1
0.45±0.1
DataSheet4U.com
0.4±0.1
45°
0.3
DataShee
DataSheet4U.com
DataSheet4 U .com
No. UP005-A-P-SD-1.1
TITLE SOT895-A-PKG Dimensions
No.
SCALE
UNIT
UP005-A-P-SD-1.1
mm
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
ø1.5
+0.1
-0
2.0±0.05
4.0±0.1(10 pitches : 40.0±0.2)
et4U.com
5° max.
ø1.5
+0.1
-0
4.75±0.1
8.0±0.1
0.3±0.05
2.0±0.1
321
45
DataSheet4U.com
DataShee
Feed direction
No. UP005-A-C-SD-1.1
DataSheet4U.com
DataSheet4 U .com
TITLE
No.
SCALE
UNIT
SOT895-A-Carrier Tape
UP005-A-C-SD-1.1
mm
Seiko Instruments Inc.


S-1132B34 Datasheet PDF
No Preview Available !

Click to Download PDF File

www.DataSheet4U.com
16.5max.
et4U.com
Enlarged drawing in the central part
DataSheet4U.com
13.0±0.3
DataShee
DataSheet4U.com
DataSheet4 U .com
(60°) (60°)
No. UP005-A-R-SD-1.1
TITLE
No.
SCALE
UNIT
SOT895-A-Reel
UP005-A-R-SD-1.1
QTY.
1,000
mm
Seiko Instruments Inc.



Click to Download PDF File