ZXCT1051 Precision wide input range current monitor
Description
The ZXCT1051 is a wide input range current monitor, whic...
ZXCT1051 Precision wide input range current monitor
Description
The ZXCT1051 is a wide input range current monitor, which operates over a range of input
voltages from ground up to VCC-2V. As a result the ZXCT1051 can be used on the high or low side of the load. The very low offset
voltage enables a typical accuracy of 1% for sense
voltages of only 30mV, giving better tolerances for small sense resistors necessary at higher currents. The ZXCT1051 provides a fixed gain of 10 thereby removing the need for an additional resistor.
Features
www.DataSheet4U.com
Applications
Power supply DC motor and solenoid control Battery management Over current monitor Power management Short circuit detection
Accurate down to end current sensing Output
voltage scaling x10 0 to VCC-2V sense input range 2.7 to 20V supply range 50 µA quiescent current 1% typical accuracy SOT23-5 package
Pin connections
Typical application circuit
VSENSE+ RSENSE VSENSE-
VCC GND VOUT
VSENSEVSENSE+ VSENSEVCC ZXCT1051 GND VOUT
VSENSE+
VOUT
Ordering information
Order code ZXCT1051E5TA Package SOT23-5 Partmark 1051 Reel size (inches) 7 Tape width (mm) 8 Quantity per reel 3,000
Issue 2 - November 2006
© Zetex Semiconductors plc 2006
1
www.zetex.com
ZXCT1051
Absolute maximum ratings
VCC max.
Voltage on VSENSE- and VSENSE+
Voltage on all other pins VSENSE "(VSENSE+) - (VSENSE-) Operating temperature, Tamb Storage temperature Maximum junction temperature Package power dissipation 20V -...