ZXCT1012 Reduced height micro-power current monitor
Description
The ZXCT1012 is a high side current sense monitor. Using...
ZXCT1012 Reduced height micro-power current monitor
Description
The ZXCT1012 is a high side current sense monitor. Using this type of device eliminates the need to disrupt the ground plane when sensing a load current. The ZXCT1012 takes the
voltage developed across a small value resistor and translates it into a proportional output current. A user defined output resistor scales the output current into a ground referenced
voltage. The ZXCT1012 has the accuracy specification of the ZXCT1010 but in TSOT23-5, and TDFN3x3-5. A minimum operating current of just 3.5µA, combined with its TSOT23-5 package make it suitable for portable battery equipment where size and current consumption are critical. The wide input
voltage range down to as low as 2.5V make it suitable for a wide range of applications requiring direct operation from a battery.
Features
www.DataSheet4U.com
Applications
Battery fuel gauge Battery chargers Overcurrent monitor Power management
2.5V to 20V supply range 3.5µA quiescent current Current output - user set gain Thin package - TSOT23-5 and TDFN3x3-5 Temperature range -40 to 85°C
Pin connections
SENSE-
Applications circuit
IN SENSE
OUT
TSOT23-5 Pinout - top view
SENSE+
SENSE+ SENSE-
ZXCT1012
OUT
LOAD OUT
NC GND OUT
3
4
SENSE-
2
1
5
SENSE+
OUT
TDFN3x3-5 Pinout - bottom view
Ordering information
Device Package Status Active Active Device marking 1012 1012 Reel size Tape width (inches) (mm) 7 7 8 8 Quantity per reel 3000 3000
Z...