SPECIFICATION
FOR
CERAMIC
RESONATOR
www.DataSheet4U.com
MODEL NAME: ZTA8.0MT /ZTT8.0MT
SHANDONG YIGUANG ELECTRONIC...
SPECIFICATION
FOR
CERAMIC
RESONATOR
www.DataSheet4U.com
MODEL NAME: ZTA8.0MT /ZTT8.0MT
SHANDONG YIGUANG ELECTRONIC JOINT STOCK CO., LTD Tel: 86 539 8269397 8269399 Fax: 86 539 8269396
ZTA8.0MT
ZTT8.0MT CERAMIC RESONATOR
1.
SCOPE This specification is applied to the ceramics resonator used for the clock Oscillation of Microprocessor. MODEL NAME
Part Name ZTA8.0MT ZTT8.0MT Customer s Part number Drawing No.
2.
3.
DIMENSIONS
www.DataSheet4U.com
MARK 1
ZTA8.0MT
MARK 2
ZTT8.0MT
1
ZTA8.0MT /ZTT8.0MT CERAMIC RESONATOR
4. TEST CIRCUIT Parts shall be measured under a condition (Temp.:3 35 .Hum.:45 85 )unless any Necessity to measure under a standard condition (Temp.:20±2 .Humi.:65±5 ) is occurred.
www.DataSheet4U.com
X1 ZTA8.0MT C1=C2=30PF IC: TC4069UBP VDD=+5V
X2
ZTT8.0MT
5. ELECTRICAL CHARACTERISTICS
Item 5-1 5-2 5-3 5-4 5-5 5-6 5-7 Frequency Accuracy Resonant Impedance Operating Temperature Range Storage Temperature Range Stability Temperature Withstanding
Voltage Insulation Resistance Aging for 10 Years
Requirements 8.0M±0.5% 30 max
-20 to +80 -30 to +85 ±0.3% max. DC 100V. 100 M 20 +80
less than 5 sec min DC 10V
±0.5±
max
2
ZTA8.0MT/ZTT8.0MT CERAMIC RESONATOR
6.PHYSICAL AND ENVIRONMENTAL CHARCTERISTICS Test Item Lead strength 6-1 Lead Bending Condition of Test Force of 1 Kg is applied for 10 second to each lead in axial direction. Firmed the terminal up to 2mm. Resonator lead shall be subjected to withstand against 90º bending its stem. This ope...