ZIF600

Obsolescence Notice This product is obsolete. This information is available for your convenience only. For more information on Zarlink’s obsolete products and replacement product lists, please visit http://products.zarlink.com/obsolete_products/ ZIF600 ZIF600 Pager Synthesiser and 4FSK Demodulator DS4771 - 1.2 October 1997 The ZIF600 synthesiser is for channel selection in 4FSK pagers. A reference frequency is generated by an on-chip crystal oscillator with an AFC external trimming varacator controlled by a DAC. The ZIF600 digital demodulator uses DSP techniques to optimise the data extraction in the presence of noise and also generates an AFC output to adjust the crystal frequency. Separate power controls allow the system current consumption to be minimised. All functions are controlled by a serial bus with a simple programming format and with four control pins which are used to control the power up and power down functions of the blocks to allow sequenced wake up and optimised power consumption. RXQ RXI SRF DATA0 DATA1 VSSD VDDD VREF RBIAS PDOUT PLLC 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 DSC2 DSC1 DATA LE CLOCK VSSA VCOFIN VDDA REFOSCB TSS REFOSC VSSI ZIF600 19 18 17 16 15 14 13 FEATURES s Low Voltage Operation, 2.7 to 3.3V s On-chip Reference Oscillator s Channel Select Synthesiser s Direct VCO input at up to 330MHz s 6400 Baud Digital 4FSK Demodulator s Serial Control Bus s Very Low Power Consumption s Small QSOP24 Package DACOUT QP24 Fig.1 Pin connection...