XPC823ELE

www.DataSheet4U.com Order this document by MPC823ELE/D Revision 1 MPC823 AC Electrical Specifications This document contains detailed information on power considerations, DC/AC electrical characteristics, and AC timing specifications for the MPC823. Note: Visit our website at www.motorola.com if you are using a frequency other than 25, 40, or 50MHz. Our website contains a spreadsheet that you can use to calculate the timing for your specific system frequency. This device contains circuitry protecting against damage from high-static voltage or electrical fields. However, it is advised that precautions be taken to avoid application of any voltages higher than the maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused inputs are tied to an appropriate logic voltage level (either GND or VCC). This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. PowerPC is a registered trademark of IBM Corp. and is used by Motorola under license from IBM Corp. I2C is a registered trademark of Philips Corporation. Ó 2000 Motorola, Inc.All Rights Reserved. www.DataSheet4U.com MAXIMUM RATINGS (GND = 0V) RATING Supply Voltage SYMBOL VDDH VDD KAPWR VDDSYN Input Voltage (JTAG and GPIO) Input Voltage (All other pins) Operating Temperature VIN VIN TA VALUE -0.3 to 4.0 -0.3 to 4.0 -0.3 to 4.0 -0.3 to 4.0 -0.3 to 5.8 -0.3 to 3.3 0 to 70û or -40û to 85û -55 to +...