Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting. IDC design allows for quick termination.
• Part of ...
Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting. IDC design allows for quick termination.
Part of a total flat cable wiring solution, when used in conjunction with XG4, XG5 and XG8 sockets and plugs. End terminates cable to a PCB or acts as a pass through for connection to other cables or PCB’s. Uses a standard 2.54-mm grid terminal arrangement for easier design of circuits. Terminal Arrangement: standard or reverse. Uses UL94V-0 approved insulation material. IDC Assembly Tools are available.
XG2 Connectors
■ Terminal Arrangement
The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the wires and the terminals would be as shown below. Standard Terminal Arrangement
Cable No.
Reverse Terminal Arrangement
Cable No.
http://www.DataSheet4U.net/
Cable No. Cable number arrangement (top view)
Cable No.
■ Ratings and Characteristics
Rated current Rated
voltage Contact resistance Dielectric strength Operating temperature 1A 250 VAC 15 mΩ max. (at 20 mV, 100 mA max.) 500 VAC for 1 min. (leakage current: 1 mA max.) −55°C to 85°C (with no icing at low temperature)
■ Materials and Finish
Base Fiber-glass reinforced PBT resin (UL94V-0)/black Terminals Cover Copper alloy/nickel base, tin plating Fiber-glass reinforced PBT resin (UL94V-0)/black Contacts Mating end Copper alloy/nickel base, tin plating
Insulation resistance 1,000 MΩ min. (at 500 VDC)
■ Applicable Wires
1.27...