X28C010, X28HT010
5V, Byte Alterable EEPROM
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Tech...
X28C010, X28HT010
5V, Byte Alterable EEPROM
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc
DATASHEET
FN8105 Rev 1.00 February 12, 2007
The Intersil X28C010/X28HT010 is a 128K x 8 EEPROM, fabricated with Intersil's proprietary, high performance, floating gate
CMOS technology. Like all Intersil programmable non-volatile memories, the X28C010/X28HT010 is a 5V only device. The X28C010/X28HT010 features the JEDEC approved pin out for byte-wide memories, compatible with industry standard EEPROMs.
The X28C010/X28HT010 supports a 256-byte page write operation, effectively providing a 19µs/byte write cycle and enabling the entire memory to be typically written in less than 2.5 seconds. The X28C010/X28HT010 also features DATA Polling and Toggle Bit Polling, system software support schemes used to indicate the early completion of a write cycle. In addition, the X28C010/X28HT010 supports Software Data Protection option.
Intersil EEPROMs are designed and tested for applications requiring extended endurance. Data retention is specified to be greater than 100 years.
Features
Access time: 120ns
Simple byte and page write - Single 5V supply - No external high
voltages or VPP control circuits - Self-timed No erase before write No complex programming algorithms No overerase problem
Low power
CMOS - Active: 50mA - Standby: 500µA
Software data protection - Protects data against system leve...