w
WM8216
60MSPS 10-bit 2-channel CCD Digitiser
DESCRIPTION
The WM8216 is a 10-bit analogue front end/digitiser IC whi...
w
WM8216
60MSPS 10-bit 2-channel CCD Digitiser
DESCRIPTION
The WM8216 is a 10-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 60MSPS.
The device includes two analogue signal processing channels each of which contains Reset Level Clamping, Correlated Double Sampling and Programmable Gain and Offset adjust functions. The output from each of these channels is time multiplexed into a single high-speed 10-bit Analogue to Digital Converter. The digital output data is available in 10-bit wide parallel format.
An internal 4-bit DAC is supplied for internal reference level generation. This may be used during CDS to reference CIS signals or during Clamping to clamp CCD signals. An external reference level may also be supplied. ADC references are generated internally, ensuring optimum performance from the device.
Using an analogue supply
voltage of 3.3V and a digital interface supply of 3.3V, the WM8216 typically only consumes 330mW
BLOCK DIAGRAM
FEATURES
10-bit ADC 60MSPS conversion rate Low power – 330mW typical 3.3V single supply operation Single or dual channel operation Correlated double sampling Programmable gain (9-bit resolution) Programmable offset adjust (8-bit resolution) Flexible clamp timing Programmable clamp
voltage Internally generated
voltage references 32-lead QFN package Serial control interface
APPLICATIONS
Digit...