W29F102 64K × 16 CMOS FLASH MEMORY
GENERAL DESCRIPTION
The W29F102 is a 1-megabit, 5-volt only CMOS flash memory organiz...
W29F102 64K × 16
CMOS FLASH MEMORY
GENERAL DESCRIPTION
The W29F102 is a 1-megabit, 5-volt only
CMOS flash memory organized as 64K × 16 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29F102 results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.
FEATURES
Single 5-volt operations: − 5-volt Read − 5-volt Erase − 5-volt Program
Low power consumption − Active current: 25 mA (typ.) − Standby current: 20 µA (typ.)
Fast Program operation: − Word-by-Word programming: 50 µS (max.) Fast Erase operation: 100 mS (typ.) Fast Read access time: 45/50/55/70 nS Endurance: 1K/10K cycles (typ.) Ten-year data retention Hardware data protection 8K word Boot Block with Lockout protection
Automatic program and erase timing with internal VPP generation End of program or erase detection − Toggle bit − Data polling Latched address and data TTL compatible I/O JEDEC standard word-wide pinouts Available packages: 40-pin TSOP and 44-pin PLCC
-1-
Publication Release Date: June 1999 Revision A4
Free Datasheet http://www.datasheet4u.com/
W29F102
PIN CONFIGURATIONS BLOCK DIAGRAM
VDD
A9 A10 A11 A12 A13 A14 A15 NC WE VDD NC CE DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ...