VFC1506

www.DataSheet4U.com VFC1506 Vishay Foil Resistors High Precision Flip Chip, (Patents Pending in Industrialized Countries) FEATURES Nominal TCR: 0.5ppm/°C (- 55°C to + 125°C) Resistance Range: 10Ω to 40kΩ Tolerance: to ± 0.01% Load Life Stability: ± 0.01% maximum ∆R under full rated power at + 70°C for 2000 hours Shelf Life Stability: 50ppm (0.005%) over several years Voltage Coefficient: < 0.00001%/volt (< 0.1ppm/V) Current Noise: < 0.010µV (rms)/volt of applied voltage Non Inductive: < 0.08 Terminal Finishes Available: Lead (Pb)-free (Sn 99.3% Cu 0.7%) Tin/Lead Alloy (Sn 62% Pb 36% Ag 2%) Product may not be to scale The VFC1506 is a surface mountable flip chip resistor that utilizes Ultra Precision Bulk Metal® “Z” Foil. This product differs from other Vishay Bulk Metal® Foil surface mount devices in as much as it is installed with the foil side facing the PCB providing better power handling capabilities. The Foil element is isolated from the PCB by a protective overcoating. This overcoating plus the overall product design isolates the resistor from handling and installation stresses. The temperature coefficient of resistance (TCR) curve below shows the new revolutionary “Z” Foil with its nominal TCR of 0.5ppm/ ° C. The Bulk Metal ® Foil characteristics of excellent long term stability, low noise and availability of tight tolerance are maintained in this Flip Chip configuration. The VFC1506 is available in any value within the specified resistance range....