UTC801

UTC 801/802 INTEGRATED CIRCUIT 3/4 STRINGS Xmas LIGHT CONTROL FEATURES *Adjustable flash rate. *Programmable 2/3/4 strings of bulbs. *UTC 801 sequential mode for about 57 sec. 4 light string flash for about 3 sec. according to normal fosc. then back to sequential again. *UTC 802 sequential mode only. APPLICATION *Xmas light controller, any AC control toys. DIP-8 PIN CONFIGURATIONS Vss 1 X2 Y3 VDD 4 8 S4 7 S3 6 S2 5 S1 ELECTRICAL CHARACTERISTICS (@VDD=3.6V unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP. Operating Voltage Operating Current Quiescent Current Driving Current Oscillator Frequency VDD IOP ISB IOH FOSC - 3.6 No load -- -- @VDS=1.2V - 0.02 External ± 30%, Rosc ~ 150kΩ - 150 Operating Temperature Temp. 0 25 MAX 5 60 UNIT V mA µA mA Hz °C UTC UNISONIC TECHNOLOGIES CO., LTD. 1 QW-R120-001,B UTC 801/802 APPLICATION DIAGRAM INTEGRATED CIRCUIT Note 1: IC CHIP ~ 1.26 x 1.14 mm2, substrate to VDD Note 2: This specification is subject to be changed without prior notice. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to r...