UTC UT136FE
TRIACS
DESCRIPTION
Glass passivated sensitive gate triacs in a full pack,plastic envelop, intended for use i...
UTC UT136FE
TRIACS
DESCRIPTION
Glass passivated sensitive gate triacs in a full pack,plastic envelop, intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants.
TRIAC
SYMBOL
MT2
1
TO-220F
G MT1
1:MT1 2:MT2 3:GATE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Repetitive peak off-state
voltages
SYMBOL
UT136FE-5 www.DataSheet4U.com VDRM UT136FE-6 UT136FE-8 IT(RMS)
RATINGS
500* 600* 800 4
UNIT
V
RMS on-state current full sine wave; Ths ≤ 92 °C Non-repetitive peak on-state current Full sine wave; Tj = 125 °C prior to surge; with reapplied VDRM(max) t = 20ms t = 16.7 ms I2t for fusing (t = 10 ms) Repetitive rate of rise of on-state current after triggering ITM = 6 A; IG = 0.2A;dIG /dt = 0.2A/μs T2+ G+ T2+ GT2- GT2- G+
A
ITSM I2t
25 27 3.1
A A2s
dIT /dt
50 50 50 10
A/μs
Peak gate
voltage VGM 5 V Peak gate current IGM 2 A Peak gate power PGM 5 W Average gate power (over any 20 ms period) PG(AV) 0.5 W ℃ Storage temperature Tstg -40 ~ 150 ℃ Operating junction temperature Tj 125 *Although not recommended, off-state
voltages up to 800V may be applied without damage, but the traic may switch to the on-state. The rate of rise of current should not exceed 3A/µs.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R401-022,B
UTC UT136FE
PARAMETER
Repetitive paek
voltage form all three terminals to external heatsink (R.H.≦65%,clean and dustfree) Capacitance from MT2 to external heatsink (f=1MHz)
TRIAC...