DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC7073
µPC7073 ANALOG SUBSCRIBER LINE LSI (BS-SLIC)
The µPC7073 is a B...
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC7073
µPC7073 ANALOG SUBSCRIBER LINE LSI (BS-SLIC)
The µPC7073 is a BS-SLIC that can be used in analog subscriber circuits such as private branch exchangers (PBXs) and switching equipment for central offices. It features two of the functions required for analog subscriber circuits: subscriber line feed control and subscriber line supervision. Use of the µPC7073 in combination with a digital CODEC (µPD9903) can reduce the number of components required in analog subscriber circuits.
FEATURES
Single-chip, monolithic LSI (bipolar) Constant-resistance feed or semi constant-current feed Note 200-Ω feed, 400-Ω feed, or Tip-to-Ring pin feedout status (HIGH and WET) On-chip metering signal superposing circuit On-hook sending and receiving Loop detection Note Ground detection and ground-fault/power contact protection Note Three on-chip relay drivers (flyback prevention diode must be externally provided) Two power supply
voltages (–48 V and +5 V) Low power consumption: 110 mW (TYP., when on hook) Note Requires µPD9903.
ORDERING INFORMATION
Part Number Package 48-pin plastic shrink SOP (375 mil)
µPC7073GT
The information in this document is subject to change without notice. Document No. S10896EJ2V0DS00 (2nd edition) (Previous No. ID-3576) Date Published June 1996 P Printed in Japan
©
1996
µPC7073
PIN CONFIGURATION
48-pin plastic shrink SOP (375 mil)
DCOUT3 DCOUT2 DCOUT1 DCIN1 DCIN2 BBOUT ASCN AGDT BIAS RX ACOM...