DATA SHEET
BiCMOS INTEGRATED CIRCUIT
µ PC1935
DC-DC CONVERTER CONTROL IC
DESCRIPTION
The µ PC1935 is a low-voltage i...
DATA SHEET
Bi
CMOS INTEGRATED CIRCUIT
µ PC1935
DC-DC CONVERTER CONTROL IC
DESCRIPTION
The µ PC1935 is a low-
voltage input DC-DC converter control IC that can configure a three-output (step-up × 2, inverted output × 1) DC-DC converter at an input
voltage of 3, 3.3, or 5 V. Because of its wide operating
voltage range, this IC can also be used to control DC-DC converters using an AC adapter for input.
FEATURES
Low supply
voltage: 2.5 V (MIN.) Operating
voltage range: 2.5 to 20 V (breakdown
voltage: 30 V) Can control three output channels. Timer latch circuit for short-circuit protection. Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection. Dead times of channels 2 (step-up) and 3 (inverted output) can be set from external resistors. Dead time of channel 1 (step-up) is internally fixed to 85 %. Soft start of each channel can be set independently. Each channel can be turned ON/OFF independently.
ORDERING INFORMATION
Part Number Package 16-pin plastic TSSOP (5.72 mm (225))
µ PC1935GR
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. G13418EJ3V0DS00 (3rd edition) Date Published March 2000 NS CP (K) Printed in Japan
The mark 5 shows major revised points. 1998
µ PC1935
BLOCK DIAG...