ALUMINUM ELECTROLYTIC CAPACITORS
MW 5mmL, For General Audio Equipment series
Acoustic series, with 5mm height. Complian...
ALUMINUM ELECTROLYTIC
CAPACITORS
MW 5mmL, For General Audio Equipment series
Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC).
SW
Smaller
Specifications
MW
Item Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated
Voltage Range
4 to 50V
Rated Capacitance Range 0.1 to 470µF
Capacitance Tolerance Leakage Current
Tangent of loss angle (tan δ)
± 20% at 120Hz, 20°C
After 2 minutes' application of rated
voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated
voltage (V) tan δ (MAX.)
4 0.35
6.3 0.24
10 0.20
16 0.16
25 0.14
35 0.12
50 0.10
Measurement frequency : 120Hz
Rated
voltage (V)
4 6.3 10 16 25 35 50
Stability at Low Temperature
Impedance ratio
Z– 25°C / Z+20°C
7
4
3
2
2
22
ZT / Z20 (MAX.)
Z– 40°C / Z+20°C
15
8
6
4
4
33
Endurance
Shelf Life Marking
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated
voltage is applied for 1000 hours at 85°C.
Capacitance change tan δ Leakage current
Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value
After storing the
capacitors under no load at 85°C for 1000 hours and then performing
voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above....