DatasheetsPDF.com

UMW0G471MDD Datasheet

Part Number UMW0G471MDD
Manufacturers Nichicon
Logo Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Datasheet UMW0G471MDD DatasheetUMW0G471MDD Datasheet (PDF)

ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipment series Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller Specifications MW Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 470µF Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not mo.

  UMW0G471MDD   UMW0G471MDD






ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS MW 5mmL, For General Audio Equipment series Acoustic series, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SW Smaller Specifications MW Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 470µF Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.) 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z– 25°C / Z+20°C 7 4 3 2 2 22 ZT / Z20 (MAX.) Z– 40°C / Z+20°C 15 8 6 4 4 33 Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above..


2015-01-02 : UMW0G100MDD    UMW0G101MDD    UMW0G220MDD    UMW0G221MDD    UMW0G330MDD    UMW0G331MDD    UMW0G470MDD    UMW0G471MDD    UMW0J100MDD    UMW0J101MDD   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)