www.ti.com
INTERLEAVED DUAL PWM CONTROLLER WITH PROGRAMMABLE MAXIMUM DUTY CYCLE
UCC28220-Q1
SLUS789 – MARCH 2008
FEAT...
www.ti.com
INTERLEAVED DUAL PWM CONTROLLER WITH PROGRAMMABLE MAXIMUM DUTY CYCLE
UCC28220-Q1
SLUS789 – MARCH 2008
FEATURES
1
2 Qualified for Automotive Applications 2-MHz High-Frequency Oscillator With 1-MHz
Operation Per Channel
Matched Internal Slope Compensation Circuits Programmable Maximum Duty Cycle Clamp
60% to 90% Per Channel
Peak Current Mode Control With Cycle-by-Cycle Current Limit
Current Sense Discharge Transistor for Improved Noise Immunity
Accurate Line Under
voltage and Over
voltage Sense With Programmable Hysteresis
Opto-Coupler Interface Operates From 12-V Supply Programmable Soft-Start
APPLICATIONS
High Output Current (50 A to 100 A) Converters
Maximum Power Density Designs High-Efficiency 48-V Input with Low-Output
Ripple Converters
High-Power Offline, Telecom, and Datacom Power Supplies
DESCRIPTION
The UCC28220 is a Bi
CMOS interleaved dual-channel PWM controller. Peak current mode control is used to ensure current sharing between the two channels. A precise maximum duty cycle clamp can be set to any value between 60% and 90% duty cycle per channel. UCC28220 has an UVLO turn-on threshold of 10 V for use in 12-V supplies. It has 8-V turn-off threshold.
Additional features include a programmable internal slope compensation with a special circuit that ensures exactly the same slope is added to each channel. The UCC28220 is available in a 16-pin low-profile TSSOP package.
TYPICAL APPLICATION
VIN (48 V)
UCC28220 1 LINEOV N/C 16
B...