QE1M Device Quad E1 Mapper
QE1M Device
Quad E1 Mapper TXC-04252 DATA SHEET FEATURES
• Add/drop four 2.048 Mbit/s signals from STM-1/VC-4, STS-3/AU-...
Description
QE1M Device
Quad E1 Mapper TXC-04252 DATA SHEET FEATURES
Add/drop four 2.048 Mbit/s signals from STM-1/VC-4, STS-3/AU-3 or STS-1 buses Independent add and drop bus timing modes Selectable HDB3 positive/negative rail or NRZ E1 interface. Performance counter provided for coding violations. Digital desynchronizer Drop buses are monitored for parity, loss of clock, upstream AIS and H4 multiframe errors Performance counters are provided for TU/VT pointer movements, BIP-2 errors and Far End Block Errors (FEBEs) TU/VTs are monitored for Loss Of Pointer, New Data Flags (NDFs), AIS, Remote Defect Indication (RDI), and size errors (S-bits) V5 Byte Signal Label Mismatch and Unequipped detection E1 facility and line loopbacks, generation of BIP-2 and FEBE errors, and send RDI capability Intel / Motorola / Multiplexed-compatible microprocessor bus interface with interrupt capability Programmable internal RISC processor implements VT-POH and VT-alarm handling J2 16-byte ETSI trail trace comparison Optional V4 receive and transmit byte access TU tandem connection processing (N2 byte) IEEE 1149.1 standard boundary scan Single +5 V ± 5 % power supply 160-lead plastic quad flat package or 208-lead PBGA (17 mm x 17 mm)
DESCRIPTION
The Quad E1 Mapper device is designed for add/drop multiplexer, terminal multiplexer, and dual and single unidirectional ring applications. Four E1 2.048 Mbit/s signals are mapped to and from asynchronous Tributary Unit-12 (TU-12) or...
Similar Datasheet